Problems setting up wireless router

  • Thread starter Thread starter Wallace
  • Start date Start date
W

Wallace

I've set up two wireless routers before but am having problems setting up a
third. When I try to set up the box using
http://168.0.0.0 (can't remember the IP address) it doesn't see the router.
The router was previously used on another computer system so was previously
setup.

Anyone have any idea why it's not communicating?
 
Wallace said:
I've set up two wireless routers before but am having problems setting up
a third. When I try to set up the box using
http://168.0.0.0 (can't remember the IP address) it doesn't see the
router. The router was previously used on another computer system so was
previously setup.

Anyone have any idea why it's not communicating?
Click to expand...

Seems the address was changed from default, reset the router then you
will be able to go in via your web browser, if we knew the make of the
router then someone could give you the IP in case you don't know the
default.

rgds
Roberto
 
Hi,

It would be much better if you could visit the manufacturer's site for
downloading user's manual or consulting their technical support. Usually,
they will have step-by-step instructions for how to set up "bridging"
between wireless routers. Steps could be quite different from models to
models, such as possibly adding MAC address, and turn on options from Admin
pages.

And they will tell you the default IP address for the router's admin page.
Please noted that you probably would need to set the second or third
router's IP address to a different one before connecting all together, or
you may risk for mixing all three routers together.

Hope this helps.
 
Back
Top