Problems Joining A Domain

  • Thread starter Thread starter Jim
  • Start date Start date
J

Jim

Hi,

I am trying to join various Win200 and Win2003 servers to a Win2003 DC.
The problem I am experiencing is about 50% of the servers on my network can
join fine to the DC and the other 50% can't. The DC hosts the DNS for AD
on it and uses itself for DNS and forwards the rest. When I try to join a
server onto this domain I make sure that the server is using the DC as its
DNS server. The errors I get vary between servers and times I try to join
the domain. The errors are:

"Network Path Not Found"
"Login Failure : The target name is incorrect"
There is also an error about the Domain Controller not being present or
something along those lines.

I want to say that there is something most likely wrong with the DNS, but I
am not sure since half of the servers can join the domain fine. I try to
run netdiag on the DC but I get an error about something in the dnsapi.dll
file.

Any help from anyone would be greatly appreciated as this is starting to
drive me crazy :-)

Thanks Everyone!!
 
in the problem computer, use nslookup to check the DNS status. these pages may help,

domain faqs Symptoms: When attempting to join a domain, you may receive one of the following ... 4) If you try to join the domain by using the NetBIOS domain name, ...
www.chicagotech.net/domainfaqs.htm



network path not found SYMPTOMS: When trying to join a W2K/XP to a Windows 2000 domain by using he NetBIOS domain name, ... Symptom: some w2k/xp can't join the domain randomly. ...
www.chicagotech.net/pathnotfound.htm




Don't send e-mail or reply to me except you need consulting services. Posting on MS newsgroup will benefit all readers and you may get more help.

Bob Lin, MS-MVP, MCSE & CNE
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.

Hi,

I am trying to join various Win200 and Win2003 servers to a Win2003 DC.
The problem I am experiencing is about 50% of the servers on my network can
join fine to the DC and the other 50% can't. The DC hosts the DNS for AD
on it and uses itself for DNS and forwards the rest. When I try to join a
server onto this domain I make sure that the server is using the DC as its
DNS server. The errors I get vary between servers and times I try to join
the domain. The errors are:

"Network Path Not Found"
"Login Failure : The target name is incorrect"
There is also an error about the Domain Controller not being present or
something along those lines.

I want to say that there is something most likely wrong with the DNS, but I
am not sure since half of the servers can join the domain fine. I try to
run netdiag on the DC but I get an error about something in the dnsapi.dll
file.

Any help from anyone would be greatly appreciated as this is starting to
drive me crazy :-)

Thanks Everyone!!
 
2 ways of doing this. By DHCP server or by assigning each member server a
static IP address and in including Host(A) lookup records in the forward
lookup zone for your Domain. check your cabling and all that crap too.
Compare the member servers that will join to the ones that won't. What's
different? if anything...



Jim said:
Hi,

I am trying to join various Win200 and Win2003 servers to a Win2003 DC.
The problem I am experiencing is about 50% of the servers on my network can
join fine to the DC and the other 50% can't. The DC hosts the DNS for AD
on it and uses itself for DNS and forwards the rest. When I try to join a
server onto this domain I make sure that the server is using the DC as its
DNS server. The errors I get vary between servers and times I try to join
the domain. The errors are:

"Network Path Not Found"
"Login Failure : The target name is incorrect"
There is also an error about the Domain Controller not being present or
something along those lines.

I want to say that there is something most likely wrong with the DNS, but I
am not sure since half of the servers can join the domain fine. I try to
run netdiag on the DC but I get an error about something in the dnsapi.dll
file.

Any help from anyone would be greatly appreciated as this is starting to
drive me crazy :-)

Thanks Everyone!!
Click to expand...
=----
 
Add WINS and use it as a "backup" means to find the Domain. When joining,
are you using the FQDN of the Domain or the Netbios Name. If you are
depending only on DNS then you might want to use the FQDN of the domain
instead of a netbios version of the domain name when attempting to join.
By using both DNS and WINS at the same time you kinda cover all your bases
and narrow the opportunity for it to fail.

--
Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com
-----------------------------------------------------
Understanding the ISA 2004 Access Rule Processing
http://www.isaserver.org/articles/ISA2004_AccessRules.html

Microsoft Internet Security & Acceleration Server: Guidance
http://www.microsoft.com/isaserver/techinfo/Guidance/2004.asp
http://www.microsoft.com/isaserver/techinfo/Guidance/2000.asp

Microsoft Internet Security & Acceleration Server: Partners
http://www.microsoft.com/isaserver/partners/default.asp
-----------------------------------------------------
 
Back
Top