PROBLEM!

  • Thread starter Thread starter Travis King
  • Start date Start date
T

Travis King

When installing Vista, I get an error and then the install cancels. "An
error occured while copying Setup files onto your local machine. Error code
is [80070241]. I'm using Daemon Tools to install Vista. Thanks.
 
Oh, and I started off burning it to a DVD and the drive wouldn't even read
it when it was done burning.
Andre Da Costa said:
Use Nero MD5 Verifier to do a CRC Check on the ISO. Try burning it to a
DVD at a low speed and try setup again.
--
--
Andre
Windows Connected | http://www.windowsconnected.com
Extended64 | http://www.extended64.com
Blog | http://www.extended64.com/blogs/andre
http://spaces.msn.com/members/adacosta

Travis King said:
When installing Vista, I get an error and then the install cancels. "An
error occured while copying Setup files onto your local machine. Error
code is [80070241]. I'm using Daemon Tools to install Vista. Thanks.
Click to expand...
Click to expand...
 
Here's a getting started guide - guides you through the burning/virtual
mounting bit:
http://www.vistabase.co.uk/welcome.php?getstarted (server might be a bit
slow)

--
Zack Whittaker
» ZackNET Enterprises: www.zacknet.co.uk
» MSBlog on ResDev: www.msblog.org
» Vista Knowledge Base: www.vistabase.co.uk
» This mailing is provided "as is" with no warranties, and confers no
rights. All opinions expressed are those of myself unless stated so, and not
of my employer, best friend, Ghandi, my mother or my cat. Glad we cleared
that up!

--: Original message follows :--
 
Oh, and I should add that I did burn the DVD at 2x.
Travis King said:
Oh, and I started off burning it to a DVD and the drive wouldn't even read
it when it was done burning.
Andre Da Costa said:
Use Nero MD5 Verifier to do a CRC Check on the ISO. Try burning it to a
DVD at a low speed and try setup again.
--
--
Andre
Windows Connected | http://www.windowsconnected.com
Extended64 | http://www.extended64.com
Blog | http://www.extended64.com/blogs/andre
http://spaces.msn.com/members/adacosta

Travis King said:
When installing Vista, I get an error and then the install cancels. "An
error occured while copying Setup files onto your local machine. Error
code is [80070241]. I'm using Daemon Tools to install Vista. Thanks.
Click to expand...
Click to expand...
Click to expand...
 
Might I add that I was glad that I came up to my grandma's because I
discovered her Athlon XP 2800+ was idling at 79.5 C! (Just think what it
would be under full load.) I'm surprised they haven't run into any problems
with the computer such as crashing. The heatsink had loads of dust on it.
(Actually, the whole computer did.) After dusting it out, it now idles in
the upper 50's to right around 60. Still a little warmer than I would like,
but it's got the stock cooling and the computer's in a small space.
Zack Whittaker said:
Here's a getting started guide - guides you through the burning/virtual
mounting bit:
http://www.vistabase.co.uk/welcome.php?getstarted (server might be a bit
slow)

--
Zack Whittaker
» ZackNET Enterprises: www.zacknet.co.uk
» MSBlog on ResDev: www.msblog.org
» Vista Knowledge Base: www.vistabase.co.uk
» This mailing is provided "as is" with no warranties, and confers no
rights. All opinions expressed are those of myself unless stated so, and
not
of my employer, best friend, Ghandi, my mother or my cat. Glad we cleared
that up!

--: Original message follows :--
Travis King said:
When installing Vista, I get an error and then the install cancels. "An
error occured while copying Setup files onto your local machine. Error
code is [80070241]. I'm using Daemon Tools to install Vista. Thanks.
Click to expand...
Click to expand...
 
Has anyone actually gotten this thing installed? If so how avout posting a
step by step on how you did it? The rest of us could learn from it.

--
If can read this, thank a teacher. Since you are reading it in English,
thank a Soldier.


Andre Da Costa said:
Use Nero MD5 Verifier to do a CRC Check on the ISO. Try burning it to a DVD
at a low speed and try setup again.
--
--
Andre
Windows Connected | http://www.windowsconnected.com
Extended64 | http://www.extended64.com
Blog | http://www.extended64.com/blogs/andre
http://spaces.msn.com/members/adacosta

Travis King said:
When installing Vista, I get an error and then the install cancels. "An
error occured while copying Setup files onto your local machine. Error
code is [80070241]. I'm using Daemon Tools to install Vista. Thanks.
Click to expand...
Click to expand...
 
oh get over it. i had to download it at least 4 times before i got the iso
image to work right. life sucks:)!
Travis King said:
I'm very afraid that I'll have to redo the download...
Travis King said:
When installing Vista, I get an error and then the install cancels. "An
error occured while copying Setup files onto your local machine. Error
code is [80070241]. I'm using Daemon Tools to install Vista. Thanks.
Click to expand...
Click to expand...
 
samething happened to me, but i found a way to get it to read the disc.

Travis King said:
Oh, and I started off burning it to a DVD and the drive wouldn't even read
it when it was done burning.
Andre Da Costa said:
Use Nero MD5 Verifier to do a CRC Check on the ISO. Try burning it to a
DVD at a low speed and try setup again.
--
--
Andre
Windows Connected | http://www.windowsconnected.com
Extended64 | http://www.extended64.com
Blog | http://www.extended64.com/blogs/andre
http://spaces.msn.com/members/adacosta

Travis King said:
When installing Vista, I get an error and then the install cancels. "An
error occured while copying Setup files onto your local machine. Error
code is [80070241]. I'm using Daemon Tools to install Vista. Thanks.
Click to expand...
Click to expand...
Click to expand...
 
Back
Top