problem with optical mouse

  • Thread starter Thread starter Bryan Henderson
  • Start date Start date
B

Bryan Henderson

yesterday my Genius optical mouse stopped working. I presumed the computer
had frozen but when I switched on this morning it said no mouse was
attached, my old Microsoft mouse however works fine. So are optical mice
more prone to fail than ball mice? It is only about a year old. Recently a
friend of mine had an optical mouse fail which was only 4 months old.
 
Bryan Henderson said:
yesterday my Genius optical mouse stopped working. I presumed the computer
had frozen but when I switched on this morning it said no mouse was
attached, my old Microsoft mouse however works fine. So are optical mice
more prone to fail than ball mice? It is only about a year old. Recently a
friend of mine had an optical mouse fail which was only 4 months old.
Click to expand...

well I opened it up checked the cable etc and tried it again and it works
fine now. BTW not much inside one of these mice!!
 
yesterday my Genius optical mouse stopped working. I presumed the computer
had frozen but when I switched on this morning it said no mouse was
attached, my old Microsoft mouse however works fine. So are optical mice
more prone to fail than ball mice? It is only about a year old. Recently a
friend of mine had an optical mouse fail which was only 4 months old.
Click to expand...

They aren't particularly failure-prone, but the cord is just as frail
as ever, would be the most likely problem.

If you're handy with a soldering iron you might try opening the mouse
and bending the cord around the opposite direction, a little further
in, or cut the cord a few inches shorter and solder it back on...
usually the cord goes where it bends the most, near where it enters
the mouse casing. On the other hand the lower resolution optical mice
are pretty cheap these days.


Dave
 
Back
Top