Problem with older Canon i850 - "used ink tank almost full" message

  • Thread starter Thread starter Robert Paster
  • Start date Start date
R

Robert Paster

I have a 3-4 year old Canon i850 printer, that has served me very well.
However the last few days, anytime I print something I get 8 orange
blinks on the printer, and the printer monitor says "used ink tank
almost full".

When I press the resume button on the printer, it prints fine.

Is there anything I can do to fix this, or buy a new printer???

Thanks in advance,

Bob
 
There is a button press sequence that you can go through to reset that
message. A web search will find the details.
 
phreak said:
There is a button press sequence that you can go through to reset that
message. A web search will find the details.
Click to expand...
Bob - don't use the printer before doing the button press sequence as I've
read that it will then not respond to the code. Also, from what I've read,
you shouldn't have any problem simply doing the reset code once. The ink
tank is really absorbent pads in the bottom of the printer case. The
internal memory in the printer keeps a runing total on its estimate of the
ink dumped into the pads by cleanings and borderless prints. There is no
actual guage in the "waste ink tank" that measures how full it is. Some
people have taken the case apart and either replaced the pads or cleaned
them, done the reset code, and continued to print, but others have just done
the reset. I've not heard of anyone flooding their desk with ink as a
result of doing the reset once. In addition to googling you can probably
get this info on the nifty-stuff forum. Sign in and do a search for waste
ink tank reset code.
http://www.nifty-stuff.com/forum/
 
Burt said:
Bob - don't use the printer before doing the button press sequence as I've
read that it will then not respond to the code. Also, from what I've read,
you shouldn't have any problem simply doing the reset code once. The ink
tank is really absorbent pads in the bottom of the printer case. The
internal memory in the printer keeps a runing total on its estimate of the
ink dumped into the pads by cleanings and borderless prints. There is no
actual guage in the "waste ink tank" that measures how full it is. Some
people have taken the case apart and either replaced the pads or cleaned
them, done the reset code, and continued to print, but others have just done
the reset. I've not heard of anyone flooding their desk with ink as a
result of doing the reset once. In addition to googling you can probably
get this info on the nifty-stuff forum. Sign in and do a search for waste
ink tank reset code.
Click to expand...

Bob, I'm here to tell you that ink pads do fill up eventually. Since
this is his first message about it, he's probably good for another run.
I like to peak down there with a flashlight and view what I can to
determine the status of the pad. I had one last year that ran ink all
over the table and on to the white carpet and it was not my carpet
either. Luckily, I keep a product called Super Clean around that is
able to clean up fresh ink completely.
 
Al Bundy said:
Bob, I'm here to tell you that ink pads do fill up eventually. Since
this is his first message about it, he's probably good for another run.
I like to peak down there with a flashlight and view what I can to
determine the status of the pad. I had one last year that ran ink all
over the table and on to the white carpet and it was not my carpet
either. Luckily, I keep a product called Super Clean around that is
able to clean up fresh ink completely.
Click to expand...
Al - was that after one or more resets? I've never had to do one, but I
would like your info to guide me in the event that I run into the dreaded
message.
 
Burt said:
Al - was that after one or more resets? I've never had to do one, but I
would like your info to guide me in the event that I run into the dreaded
message.
Click to expand...

Resetting the clock on the ink pad message is all that most people will
ever need to do. In the case I mentioned that leaked ink, I had dumped
a ton of ink on that pad over time. I do a lot of printing, refilling,
and cleaning cycles.
Even a pad that is pretty fully saturated will continue to function
with low usage because the ink dries out and the pad will take a little
more. Eventually, it gets hard and crystalized and the ink can only go
one place, your shoes.
 
Robert said:
I have a 3-4 year old Canon i850 printer, that has served me very well.
However the last few days, anytime I print something I get 8 orange
blinks on the printer, and the printer monitor says "used ink tank
almost full".

When I press the resume button on the printer, it prints fine.

Is there anything I can do to fix this, or buy a new printer???

Thanks in advance,

Bob
Click to expand...

Thanks to all who responded. I "reset" the message, and all seems to be
working fine again.

Bob
 
Back
Top