printing

  • Thread starter Thread starter wayne
  • Start date Start date
W

wayne

Hi,
I have set up a machine, WinXP, with a local HP psc2210
all-in-one usb printer installed. When I am running my
RDC and terminal service into the server my local printer
does not show up. I created a test printer to lpt1, and
it showed up, I used an HP office jet color. I then
switched the port on this test printer to usb, and printed
to it, the job went to the psc printer but was garbage. -
but it still showed up. I am not sure I can install the
drivers for the psc2210 on the server, or if this will fix
the problem. Is this printer supported in this type of
environment? Thanks - Wayne
 
Those all in one printers are tough. Have you tried using
an HP LaserJet 4 driver to start out?

And you shouldn't need to install the drivers onto the
termianl server. Try editing the ntprint.inf file first,
since a driver that is compatible with your printer may
already be native on the server.

-M
 
I will try the suggested driver, thanks.
- Wayne
-----Original Message-----
Those all in one printers are tough. Have you tried using
an HP LaserJet 4 driver to start out?

And you shouldn't need to install the drivers onto the
termianl server. Try editing the ntprint.inf file first,
since a driver that is compatible with your printer may
already be native on the server.

-M

.
Click to expand...
 
Back
Top