Printing problems via router Asus WL-500gPremium

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I have printer Epson CX3700 connecting to router (ip 192.168.1.1). I've
change OS from XP to Vista 32bit Business.
Now I can not print anithing.
If I install the port settings as ROW protocol (port 9100), printer starts
with printing normally, but it could not finish (as cycle job).
If I install the port setting as LPR protocol - nothing happend.
 
Does the router manual have instructions on the proper port configuration?

The manual should also have the queue name requirements if the device
supports the LPD.

I would also disable Bi-directional on the printer properties Ports tab
since Epson's normally attempt to perform ink status on the device that is
normally attached to the local system.

--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base here:
http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto

This posting is provided "AS IS" with no warranties, and confers no rights.
 
Router has not any instructions on port configuration.
And I did not see there any explanations about LPD...

So, I disabled bi-directional option - but result was the same.

Alan Morris said:
Does the router manual have instructions on the proper port configuration?

The manual should also have the queue name requirements if the device
supports the LPD.

I would also disable Bi-directional on the printer properties Ports tab
since Epson's normally attempt to perform ink status on the device that is
normally attached to the local system.

--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base here:
http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto

This posting is provided "AS IS" with no warranties, and confers no rights.

Leonid said:
I have printer Epson CX3700 connecting to router (ip 192.168.1.1). I've
change OS from XP to Vista 32bit Business.
Now I can not print anithing.
If I install the port settings as ROW protocol (port 9100), printer starts
with printing normally, but it could not finish (as cycle job).
If I install the port setting as LPR protocol - nothing happend.
Click to expand...
Click to expand...
 
I can't find this print device on the Epson website (I tried US, Canada,
Europe). Are you using a Vista driver?

Does the printer work when connected locally to the Vista machine?

If the print server does not document LPD it's probably not a supported
service so the LPR setting in Standard Port will send to a non existent
service.

--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base here:
http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto

This posting is provided "AS IS" with no warranties, and confers no rights.

Leonid said:
Router has not any instructions on port configuration.
And I did not see there any explanations about LPD...

So, I disabled bi-directional option - but result was the same.

Alan Morris said:
Does the router manual have instructions on the proper port
configuration?

The manual should also have the queue name requirements if the device
supports the LPD.

I would also disable Bi-directional on the printer properties Ports tab
since Epson's normally attempt to perform ink status on the device that
is
normally attached to the local system.

--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base here:
http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto

This posting is provided "AS IS" with no warranties, and confers no
rights.

Leonid said:
I have printer Epson CX3700 connecting to router (ip 192.168.1.1). I've
change OS from XP to Vista 32bit Business.
Now I can not print anithing.
If I install the port settings as ROW protocol (port 9100), printer
starts
with printing normally, but it could not finish (as cycle job).
If I install the port setting as LPR protocol - nothing happend.
Click to expand...
Click to expand...
Click to expand...
 
1. I use driver for Vista 32 bit (latest version 5.9bE)
http://support.epson.ru/driver_list.asp?product=421
2. Printer work correctly when connected to the Vista mashine by USB.
3. When I used Windows XP, I had not any problems whith printing this way
(PC-Router-Printer).

Alan Morris said:
I can't find this print device on the Epson website (I tried US, Canada,
Europe). Are you using a Vista driver?

Does the printer work when connected locally to the Vista machine?

If the print server does not document LPD it's probably not a supported
service so the LPR setting in Standard Port will send to a non existent
service.

--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base here:
http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto

This posting is provided "AS IS" with no warranties, and confers no rights.

Leonid said:
Router has not any instructions on port configuration.
And I did not see there any explanations about LPD...

So, I disabled bi-directional option - but result was the same.

Alan Morris said:
Does the router manual have instructions on the proper port
configuration?

The manual should also have the queue name requirements if the device
supports the LPD.

I would also disable Bi-directional on the printer properties Ports tab
since Epson's normally attempt to perform ink status on the device that
is
normally attached to the local system.

--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base here:
http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto

This posting is provided "AS IS" with no warranties, and confers no
rights.

I have printer Epson CX3700 connecting to router (ip 192.168.1.1). I've
change OS from XP to Vista 32bit Business.
Now I can not print anithing.
If I install the port settings as ROW protocol (port 9100), printer
starts
with printing normally, but it could not finish (as cycle job).
If I install the port setting as LPR protocol - nothing happend.
Click to expand...
Click to expand...
Click to expand...
 
Back
Top