Printing Issue

  • Thread starter Thread starter Eric Ochoa
  • Start date Start date
E

Eric Ochoa

I have a HP Laserjet 3030 shared from a SBS2003 machine

I have connected to the printer the following way from a Vista Ultimate
machine:

Add printer
New Local Port (\\machinename\printersharename)
Add the new drivers from HP for Universal Printing

Everything adds, but printing to it does nothing and trying to open the
properties panel just causes explorer to crash.

Any ideas?
 
Thank you so much for your post, It helped me a lot. I almost downgraded back
to XP. We bought a new Toshiba Vista Premium, and because It was not working
with the Laserjet 3030, I talked to Toshiba and they told me know no XP
drivers are for my laptop, so I was starting to find out each component of
the laptop so I could find the drivers from the chip manufacturer, you know
what a waste of time.
Thank you again for your post and the solution.
 
To be more specific, after creating the new "local port" as \\machine\printername... I added a new printer as LPT1 using the windows XP laserjet 3030 PCL6 driver (which is the same one the shared printer on the server users, this concept is similar to device mapping in remote desktop conenctions)... then just switched the port. For some reason, adding the printer directly via the network share.. the normal way, resulted in it wanting to install the Universal print driver which never worked.

Eric,

Thank you for the update. We need that.
 
Back
Top