G
grhen
2pc's side by side running XP SP3. PC #1 had an HP IIP+ via parallel and an
HP k8600 via usb. This worked fine. We added PC#2 and wanted to be able to
print from it using shares on PC #!. They both show up in Explorer on PC#2
when I drill down into Network Places and click on PC#1. Regardless of how I
try to make the connection I couldn't get the connection to work on the HP
k8600 but it did work on the HP IIp+.
So after wasting over an hour I decided to attach both printers to PC#2 and
share back to PC #!. The same results occurred. I can print to both printers
from the pc they are attached to but the other PC will only print to the HP
IIP+. IF the HP IIP+ is not attached I still cannot make the K8600 connect
via a shared connection. I have tried using the "connect" command from
explorer (the easy way), using the add printer wizard, creating a new port to
//pc_name/printer_share_name, and also writing a batch file for the startup
group using the NET USE command. All to no avail.
Is it possible XP will only share 1 printer per pc via USB? To conect to
PC#2 I had to use a Para-USB adapter. Though that wouldn't have been the case
in the original setup from on PC#1
Does anyone have a suggestion, I have used the latest updated drivers,
downloaded all XP updates, etc, etc, etc. I am out of ideas.
HP k8600 via usb. This worked fine. We added PC#2 and wanted to be able to
print from it using shares on PC #!. They both show up in Explorer on PC#2
when I drill down into Network Places and click on PC#1. Regardless of how I
try to make the connection I couldn't get the connection to work on the HP
k8600 but it did work on the HP IIp+.
So after wasting over an hour I decided to attach both printers to PC#2 and
share back to PC #!. The same results occurred. I can print to both printers
from the pc they are attached to but the other PC will only print to the HP
IIP+. IF the HP IIP+ is not attached I still cannot make the K8600 connect
via a shared connection. I have tried using the "connect" command from
explorer (the easy way), using the add printer wizard, creating a new port to
//pc_name/printer_share_name, and also writing a batch file for the startup
group using the NET USE command. All to no avail.
Is it possible XP will only share 1 printer per pc via USB? To conect to
PC#2 I had to use a Para-USB adapter. Though that wouldn't have been the case
in the original setup from on PC#1
Does anyone have a suggestion, I have used the latest updated drivers,
downloaded all XP updates, etc, etc, etc. I am out of ideas.