PRINTER DRIVERS

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I HAVE A OLIVETTI PR 4 RT THERMO RECIEPT PRINTER WITH NO DRIVERS FOR MY NEW
COMPUTER.
I HAVE THE DRIVERS ON MY OLD COMPUTER BUT CAN'T COPY THEM, CAN ANY ONE HELP
 
I have a Lexmark X3350 printer. I downloaded and saved the drivers and the
printer is attached to my serial port. However, My Windows XP will not allow
me to install this hardware. Can anyone help? Please email me at
(e-mail address removed)
 
Start your own separate post. Do not cross-post on other OPs.
Did you try the printer installation Wizard?
Start>Control Panel>Printer and Faxes>Add a Printer
 
How did you install the printer on your "old" computer?
Please, do not post in upper case, in netiquette it is considered
as shouting and very rude.
 
Thanks Mike, I have tried Olivettie web sight but their download page has
been under construction for over two weeks, if I can't retrieve the old
driver off my old computer I will have to be patient for Olivetti. Thanks
for your input
 
I downloaded it from the web some where a couple of years ago and kept a copy
on cd/rw, when I put the cd/rw in the cd rom drive it reads the folders but
won't open it.
Sorry about the upper case lettering it's just slack
thankyou for you input
 
Navigate to
http://downloads.lexmark.com/cgi-pe...:480:0:0&searchLang=en&os_group=WinXP&target=

If there are line breaks showing, make sure you remove them. The final =
is part of the URL.

Or use this short equivalent
http://tinyurl.com/d4ppm

Install this driver according to the instructions.

Tom
MSMVP
Windows Shell/User


:I have a Lexmark X3350 printer. I downloaded and saved the drivers and
the
: printer is attached to my serial port. However, My Windows XP will not
allow
: me to install this hardware. Can anyone help? Please email me at
: (e-mail address removed)
 
I hope that the printer is attached to a USB 2.0 port not the serial port.
This is an all in one device, and as with most all in one devices, the
software & drivers must be installed exactly as the instructions direct
(step by step) Possible reasons for an install to fail are multiple.
Were there any error messages when the install failed? Did you install the
drivers before you plugged the printer into the computer?
 
Back
Top