print probl with tse and 2 lan

  • Thread starter Thread starter philippe dumas
  • Start date Start date
P

philippe dumas

my configuration
1 server 2003 with TS in my lan 192.168.11.xxxx AND 1 PUBLIC ADDR
195.186.......
1 lan with thin client and prints 192.168.11.xxx ---- no problem

then

i have another remote lan (in anthoer city). internal addr. are
192.168.99.xxx)
the thin client connect to tse on my serveur 2003 via internet to my serveur
2003 195.186.... no probl.
but i cant print from this remote lan on my laser print, connect to the
remote lan with hp print server and ip adresse (192.168.99.xxx).

HOW CAN I PRINT WITH MY THIN CLIENT FROM THE REMOTE LAN TO MY PRINTER (IP)
IN MY REMOTE LAN TOO, THROUT TSE ???
 
The printer has an IP address. For sure it receives the job on some port,
usually 9100.
If you install a printer on the TS directly and you say it is configured on
a TCP/IP port on the external address of the other LAN, it will work.
Just make sure the firewall at the other office forwards requests on port
9100 to the printer internal IP address.
If you are using PCs instead of Terminals, the PCs can have the printer
installed directly on them and after that the RDP client will map the
printer on the session. In this case you do not need to do anything else.

--
Cláudio Rodrigues, MVP
Windows 2000/NT Server
Terminal Services

http://www.terminal-services.NET

-> The only Terminal Services Client for DOS.
-> The only customized RDP5.1 client with the close button disabled! :-)
-> Developers of SecureRDP, the BEST security utility for TS!

Do NOT email me directly UNLESS YOU KNOW ME or you are a Microsoft
MVP/Employee.
Use my support page on my website to submit your questions directly.
 
super ! Thank you.
and if i have more than one printers with ip address on my other lan ???
possible ??
 
Back
Top