power on password is on

  • Thread starter Thread starter ted
  • Start date Start date
T

ted

i have a compaq 6027us and the
power on password is on and
has locked me out how do i
unlock the pc. i need the hp
secret password to reset it.


thanks
 
Have you tried using the motherboard jumper to clear CMOS? I'd try that
first. The location of the jumper (it's usually close to the round CMOS
battery on the motherboard) and how to use it (some boards you just remove
it for 30 seconds or so and replace. On others it's moved from one pin to
another) shouild be in the docs that came with the PC. If not, give HP a
call for directions.
Clearing CMOS removes any power on passwords.

HH
 
Have you tried using the motherboard jumper to clear CMOS? I'd
try that first. Clearing CMOS removes any power-on passwords.
Click to expand...

It's also likely to reset the CMOS settings to their defaults. Be sure you
have a list of the currnent settings before clearing them.
 
i have a compaq 6027us and the
power on password is on and
has locked me out how do i
unlock the pc. i need the hp
secret password to reset it.

thanks
Click to expand...

The jumper name is CPWD i believe and you remove it, by default it's
shorted so you want it open.

-Fred
 
ted said:
i have a compaq 6027us and the power on password is on and
has locked me out how do i unlock the pc. i need the hp
secret password to reset it.
Click to expand...

If this is a laptop, you can't change it without the co-operation
of the manufacturer, which will also involve convincing them that
you own it.
 
It's also likely to reset the CMOS settings to their defaults. Be sure you
have a list of the currnent settings before clearing them.
Click to expand...

It might be a bit hard to make that list if the password
prevents use?

Generally OEMs have rather spartan bios options, and while
this is often seen as a negative thing it also means the
system had to be able to run correctly without some of the
more advanced settings changes available. IOW generally
there's just basic things like disabling onboard features
and boot items.
 
It might be a bit hard to make that list if the password
prevents use?
Click to expand...

True. It depends on whether you can access the BIOS settings without having
to use the password.

Regardless, you should have a list of BIOS settings written down somewhere.
I have such a listing.
 
True. It depends on whether you can access the BIOS settings without having
to use the password.

Regardless, you should have a list of BIOS settings written down somewhere.
I have such a listing.
Click to expand...

With tthe older PCs and parallel port printers, you could do a
'printscreen' of the bios settings. Is that a possibility with USB
printers?

GG
 
On Mon, 21 Jan 2008 20:32:16 -0800 (PST),
With tthe older PCs and parallel port printers, you could do a
'printscreen' of the bios settings. Is that a possibility with USB
printers?
Click to expand...


No.

I don't know that I'd consider writing down all the bios
settings all that important, unless the particular board had
some quirk in which a non-obvious setting needed to be
changed from the defaults for proper operation, and/or if
the system were overclocked then noting the o'c settings.

On the other hand if you build one system, use it for a fair
amount of time and depend on it, noting all settings changed
from defaults is conservatively a good idea. I wouldn't
bother writing down settings that aren't changed from the
defaults, there seems no point in doing that since they're
always right unless you'd changed them, and can be made
right again by clearing CMOS.
 
CBFalconer said:
If this is a laptop, you can't change it without the co-operation
of the manufacturer, which will also involve convincing them that
you own it.
Click to expand...

When I worked at Compaq - had to SEND IT IN - they would wipe it - OS to
factory ( or maybe just tossed the old drive ?).
So if you NEED the data, remove the disk, install into a desktop pc as
second drive and backup before sending back ( ASK them while on the phone)
 
It is a desktop, not a notebook.

HH


- Bobb - said:
When I worked at Compaq - had to SEND IT IN - they would wipe it - OS to
factory ( or maybe just tossed the old drive ?).
So if you NEED the data, remove the disk, install into a desktop pc as
second drive and backup before sending back ( ASK them while on the phone)
Click to expand...
 
HH wrote: ** and top-posted. Fixed. **
It is a desktop, not a notebook.
Click to expand...

So you can ignore my caution. But please do not top-post. Your
answer belongs after (or intermixed with) the quoted material to
which you reply, after snipping all irrelevant material. I fixed
this one. See the following links:

--
<http://www.catb.org/~esr/faqs/smart-questions.html>
<http://www.caliburn.nl/topposting.html>
<http://www.netmeister.org/news/learn2quote.html>
<http://cfaj.freeshell.org/google/> (taming google)
<http://members.fortunecity.com/nnqweb/> (newusers)
 
HH wrote: ** and top-posted. Fixed. **

So you can ignore my caution. But please do not top-post. Your
answer belongs after (or intermixed with) the quoted material to
which you reply, after snipping all irrelevant material. I fixed
this one. See the following links:

--
<http://www.catb.org/~esr/faqs/smart-questions.html>
<http://www.caliburn.nl/topposting.html>
<http://www.netmeister.org/news/learn2quote.html>
<http://cfaj.freeshell.org/google/> (taming google)
<http://members.fortunecity.com/nnqweb/> (newusers)
Click to expand...

And http://www.caliburn.nl/topposting

Barry
=====
Home page
http://members.iinet.net.au/~barry.og
 
Back
Top