pocket pc 2003 square

  • Thread starter Thread starter Harun Bolat
  • Start date Start date
H

Harun Bolat

Hi all,
My application form size designed for 240x320 resolution. But our customer
buy ipaq that screen is square and resolution is 240x240. So forms are not
fit to screen and have to use scroll bars.
How can I solve this problem? what can I do?

Any help will be appreciated.
 
You have to use square forms, i.e. 240x188 instead of 240x268. It works like
this. For a 240x320 screen, you take away 26 pixels for the navigation bar,
and another 26 for the menu bar. That leaves 268. But you are starting from
240, so you end up with only 188. Even on a 240x268 form, you have to allow
for the SIP, so you probably do not have much below 188 anyway.
 
thanks for reply.
In this case I have to resize forms for pocket pc 2003 square screen? But my
application have to works both of screen size that are 240x320 and 240x240.
If I resize forms to fit square, It will be very small for 240x320 screen
size and I have to crop some components because of the form size.
Is there any way to fit screen without changing form size?

thanks again.
 
As I said earlier, on 320x240 screens, you probably want to avoid the area
occupied by the SIP, anyway. I compromise by resizing full screen controls,
and scrunching up the rest.
 
thanks a lot

haber iletisinde þunlarý said:
thanks for reply.
In this case I have to resize forms for pocket pc 2003 square screen? But
my application have to works both of screen size that are 240x320 and
240x240. If I resize forms to fit square, It will be very small for
240x320 screen size and I have to crop some components because of the form
size.
Is there any way to fit screen without changing form size?

thanks again.
Click to expand...
 
Back
Top