Plug identification and supplier

  • Thread starter Thread starter The Seabat
  • Start date Start date
T

The Seabat

Howdy: Could some one please tell me the name of those little itty
bitty plugs that are used to connect the wires from the power switch
and reset button and the HDD and Power LED on the front of the case?
I tried to separate the single plug block on an HP case and messed it
up kinda bad!! The entire plug was not lined up with the new
motherboard configuration of pins.

So I would like to replace these plugs only in one and two pin
configurations. I've looked over the newegg.com web site and searched
Cyberguys.com to no avail. But I don't even know what they are called
to do a Google search.

Any help? Thank you.
 
The Seabat said:
Howdy: Could some one please tell me the name of those little itty
bitty plugs that are used to connect the wires from the power switch
and reset button and the HDD and Power LED on the front of the case?
I tried to separate the single plug block on an HP case and messed it
up kinda bad!! The entire plug was not lined up with the new
motherboard configuration of pins.

So I would like to replace these plugs only in one and two pin
configurations. I've looked over the newegg.com web site and searched
Cyberguys.com to no avail. But I don't even know what they are called
to do a Google search.

Any help? Thank you.
Click to expand...

If, what you are trying to do, is re-terminate the ends of the
wires, this company sells nylon connector shells and crimpable
pins. The pins slide in and out of the shell, if you lift the
little tab that holds the pin in place. I use the tip of
an Xacto knife to access the tab.

http://www.frontx.com/order_c.html

Paul
 
Back
Top