Please help me!!!!

  • Thread starter Thread starter Problem
  • Start date Start date
P

Problem

Hello

I have serious problem. I have got an Abit KG7 motherboard with Athlon
1200Mhz FSB 266Mhz and 256 MB DDR PC2700.
I tried to change FSB and Multiplier in BIOS and I set 12 (MULTIPLIER
FACTOR) x 133 (FSB CPU clock), FSB rate 4:4:1 and reboot the system. When
computer strt working again the monitor switched off and I reboot computer
once again bot everything without monitor working. So I turned computer off
and discharged CMOS.And than I wanted to turn computer on but it didn't
start working. I tried to discharged CMOS but there wasn't any result.
Motherboard don't want to start working. I checked power supply and video
card and everything is working. I don't know what sholu I do. I know I
shouldn't set these setings in BIOS. Is there any chance I didn't broke
motherborad or processor or memory ?

Please write to me what should I do ?

Thank you for your help

Janusz Sula
 
Problem said:
Hello

I have serious problem. I have got an Abit KG7 motherboard with Athlon
1200Mhz FSB 266Mhz and 256 MB DDR PC2700.
I tried to change FSB and Multiplier in BIOS and I set 12 (MULTIPLIER
FACTOR) x 133 (FSB CPU clock), FSB rate 4:4:1 and reboot the system. When
computer strt working again the monitor switched off and I reboot computer
once again bot everything without monitor working. So I turned computer off
and discharged CMOS.And than I wanted to turn computer on but it didn't
start working. I tried to discharged CMOS but there wasn't any result.
Motherboard don't want to start working. I checked power supply and video
card and everything is working. I don't know what sholu I do. I know I
shouldn't set these setings in BIOS. Is there any chance I didn't broke
motherborad or processor or memory ?

Please write to me what should I do ?

Thank you for your help

Janusz Sula
Click to expand...


did you use the bios reset jumper
or merely remove the battery?
 
Yes I did, I used the jumper next to Battery and I removed batter
Click to expand...


what you should do is turn the power off
and *leave the battery in*

then move the jumper over to the reset position for a few seconds...
then return it to the "normal" position

hopefully your machine will now bootup
 
U¿ytkownik "Problem said:
Hello

I have serious problem. I have got an Abit KG7 motherboard with Athlon
1200Mhz FSB 266Mhz and 256 MB DDR PC2700.
I tried to change FSB and Multiplier in BIOS and I set 12 (MULTIPLIER
FACTOR) x 133 (FSB CPU clock), FSB rate 4:4:1 and reboot the system. When
computer strt working again the monitor switched off and I reboot computer
once again bot everything without monitor working. So I turned computer off
and discharged CMOS.And than I wanted to turn computer on but it didn't
start working. I tried to discharged CMOS but there wasn't any result.
Motherboard don't want to start working. I checked power supply and video
card and everything is working. I don't know what sholu I do. I know I
shouldn't set these setings in BIOS. Is there any chance I didn't broke
motherborad or processor or memory ?

Please write to me what should I do ?

Thank you for your help

Janusz Sula
Click to expand...

I will try again but tomorow I tired
Thak you for help
I will write what will happen
 
U¿ytkownik "Problem said:
I will try again but tomorow I tired
Thak you for help
I will write what will happen
Click to expand...
My computer works.I went to servisce and they repair it for 5 USD.
 
Back
Top