Ping works, no internet from IE

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I just updated an older machine from 98 to 2000. Before the udpate, I could
connect to the Internet fine.

After the update, the machine receives all correct IP & DNS information from
my Router to my NIC (Dlink 530-TX), I just get no response when opening an IE
page. I can ping www.yahoo.com, my router as well as other PC's on my
network.

I have the latest NIC Drivers, attempted to Statically set the IP
information, nothing has worked so far.

Other PC's are connected to the same router, receiving DHCP form the router
and have no issues.

I tried the wfetch.exe program, it comes back with a 0x2726 (An Invalid
Argument was Supplied) message, nothing else.

Can someone please help?
 
Try using the netdiag support tool to check winsock for corruption. The
support tools are on install cd in the support/tools folder where you will
have to run the setup program there to install them as a set. After that run
netdiag and pay particular attention to the results for the winsock test. If
it fails see the link below on how to repair winsock. --- Steve

http://support.microsoft.com/default.aspx?scid=kb;en-us;817571
 
Steve,
Thanks for the suggestion. I ran the NetDiag, everything passed. I did
a repair on winsock just to see if would help, nothing changed. If you or
anyone else has any other suggestions, I would really appreciate it -- Dan
 
Steve,
Thanks for the suggestion, but the NetDiag came back with flying colors,
Everything passed. I performed a repair on Winsock just to see, still cannot
browse using IE or any other browser (Mozilla). If you or anyone else has
any further suggestions, I would appreciate it --- Dan
 
Back
Top