pin layout tv out asus P4R800-VM

  • Thread starter Thread starter KJ
  • Start date Start date
K

KJ

Just a posting for archive reason, no need for replies -:)

I found out the pin/header layout for the TV_OUT connector/header on
the Asus P4R800-VM (and perhaps other asus boards as well).
There is a TV out header/connector on this board, but there's no description
available.
I've been testing and found it out. Now with only a cinch/rca or better a
s-vhs/s-video female chassis part, one can create a cheap tv out. Asus sells
the AV/S brackets but they are rare and more expensive.
Here it is:

5 1
|* *|
|* * *|
-------

pin1= GND
pin2=composite signal
pin3=is emtpy/not used
pin4=S-video/s-vhs C(chroma)
pin5= GND
pin6= S-video/s-vhs Y(Luma)
 
"KJ" said:
Just a posting for archive reason, no need for replies -:)

I found out the pin/header layout for the TV_OUT connector/header on
the Asus P4R800-VM (and perhaps other asus boards as well).
There is a TV out header/connector on this board, but there's no description
available.
I've been testing and found it out. Now with only a cinch/rca or better a
s-vhs/s-video female chassis part, one can create a cheap tv out. Asus sells
the AV/S brackets but they are rare and more expensive.
Here it is:

5 1
|* *|
|* * *|
-------

pin1= GND
pin2=composite signal
pin3=is emtpy/not used
pin4=S-video/s-vhs C(chroma)
pin5= GND
pin6= S-video/s-vhs Y(Luma)
Click to expand...

That appears to be the same as pg.38 of this doc. So I guess both
boards can use the same adapter.

http://dlsvr03.asus.com/pub/ASUS/mb/socket939/A8N-VMCSM/e2294_a8n-vm_csm.pdf

Paul
 
Back
Top