PID 1212 slowly maxing out?

  • Thread starter Thread starter Trond Svendsen
  • Start date Start date
T

Trond Svendsen

After my last re-installation of Windows XP SP2 (all updates applied), PID
1212 is slowly increasing in memory usage, until the whole OS just acts up
and I have to re-boot the laptop.

What does PID 1212 (Network Service) do, and can I stop it from happening,
besides re-installing again?

Regards
Trond Svendsen
 
Hi Trond,

What is the Image name (exe) that belongs to the NETWORK SERVICE that is
maxing out? You can use view / Select Columns to get more info from task
manager.

CreateWindow
http://justpageprobe.com
The FREE Web page utility you always wanted.
Keep your router connected.
Email your IP to where you need it.
Test your enterprise Web Servers.
Plus lots more
 
OK,

Well that's a valid executable but you may have some kind of virus or
malware/trojan.
Scan for those I guess. Anyone else have an idea?

Good luck,
CreateWindow
 
PID, process identifier, numbers change every time that you boot and PID
numbers are not necessarily the same from one machine to the next. PIDs can
be used with the netstat -ano command, for example, to see what PID is what
process in the Task Manager.

process identifier (PID)
[[A numerical identifier that uniquely distinguishes a process while it
runs. Use Task Manager to view PIDs.]]

The Network Service account is a special built-in account that has reduced
privileges similar to an authenticated user account. The actual name of the
account is NT AUTHORITY\NetworkService.

Network Service uses this...
C:\WINDOWS\System32\svchost.exe -k NetworkService
to start svchost.exe to load DnsCache, the DNS Client service, which is
dnsrslvr.dll.

UPDATE your antivirus software and run a full system scan.

UPDATE whatever anti-spyware applications that you have and run a full
system scan with each one.

You might want to start in Safe Mode to run your antivirus and anti-spyware
software.

Running a full system antivirus scan or anti-spyware scan in Safe Mode can
be a good idea. Some viruses and other malware like to conceal themselves
in areas Windows protects while using them. Safe mode can prevent those
applications access and therefore unprotect the viruses or other malware
allowing for easier removal.

''In safe mode, you have access to only basic files and drivers
(mouse, monitor, keyboard, mass storage, base video, default system
services), just the minimum device drivers required to start Windows.''

Because of that some malware does not load in Safe Mode and is easier to get
rid of.

How to start Windows in Safe Mode Windows XP
http://www.bleepingcomputer.com/forums/index.php?showtutorial=61#winxo

--
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In
 
Background; while installing WinXP recently, I installed Symantec Antivirus
Corp Edition 10.1.6.6000 /SAV) before installing any network drivers. Then I
started Windows Update, and installed the rest of my software.

Just now I booted into safe mode, and ran a deep scan using SAV. No risks,
or viruses found.

I consider myself an experienced user, and I've (re)installed WinXP many
times, but this is the first time I've experienced this issue.

Here are a list of the SVCHOST.EXE running:

svchost.exe 952 DcomLaunch, TermService
svchost.exe 1020 RpcSs
svchost.exe 1060 AudioSrv, Browser, CryptSvc, Dhcp,
dmserver,
ERSvc, EventSystem,
FastUserSwitchingCompatibility, helpsvc,
lanmanserver, lanmanworkstation, Netman,
Nla, RasMan, Schedule, seclogon, SENS,
SharedAccess, ShellHWDetection, TapiSrv,
Themes, TrkWks, W32Time, winmgmt, wscsvc,
wuauserv, WZCSVC
svchost.exe 1156 Dnscache
svchost.exe 1232 LmHosts, RemoteRegistry, SSDPSRV, WebClient

Best regards
Trond Svendsen
PID, process identifier, numbers change every time that you boot and PID
numbers are not necessarily the same from one machine to the next. PIDs
can be used with the netstat -ano command, for example, to see what PID is
what process in the Task Manager.

process identifier (PID)
[[A numerical identifier that uniquely distinguishes a process while it
runs. Use Task Manager to view PIDs.]]

The Network Service account is a special built-in account that has reduced
privileges similar to an authenticated user account. The actual name of
the
account is NT AUTHORITY\NetworkService.

Network Service uses this...
C:\WINDOWS\System32\svchost.exe -k NetworkService
to start svchost.exe to load DnsCache, the DNS Client service, which is
dnsrslvr.dll.

UPDATE your antivirus software and run a full system scan.

UPDATE whatever anti-spyware applications that you have and run a full
system scan with each one.

You might want to start in Safe Mode to run your antivirus and
anti-spyware
software.

Running a full system antivirus scan or anti-spyware scan in Safe Mode can
be a good idea. Some viruses and other malware like to conceal themselves
in areas Windows protects while using them. Safe mode can prevent those
applications access and therefore unprotect the viruses or other malware
allowing for easier removal.

''In safe mode, you have access to only basic files and drivers
(mouse, monitor, keyboard, mass storage, base video, default system
services), just the minimum device drivers required to start Windows.''

Because of that some malware does not load in Safe Mode and is easier to
get
rid of.

How to start Windows in Safe Mode Windows XP
http://www.bleepingcomputer.com/forums/index.php?showtutorial=61#winxo

--
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In
Trond Svendsen said:
It's SVCHOST.EXE (PID 1212)

Best regards Trond Svendsen
 
Hi Trond,

I question why you have these services running. Maybe you need them. Are
you on a network? On dialup?

TermService = Terminal Services
Browser = Computer Browser service
FastUserSwitchingCompatibility = Fast User Switching Compatibility service
lanmanserver = Server service
lanmanworkstation = Workstation service
Nla = Network Location Awareness service
RasMan = Remote Access Connection Manager service
seclogon = RunAs Service / Secondary Logon service
ShellHWDetection = Shell Hardware Detection service
TapiSrv = Telephony service
dmserver = Logical Disk Manager service
ERSvc = Error Reporting Service
TrkWks = Distributed Link Tracking Client service
WZCSVC = Wireless Zero Configuration service
LmHosts = TCP/IP NetBIOS Helper service
RemoteRegistry = Remote Registry service
SSDPSRV = SSDP Discovery Service
WebClient = WebClient service

If not on a network, I would disable the following services:

Terminal Services
Disabled, for security measures.
Manual, if using Remote Desktop (Remote Administration), Remote Assistance,
Fast User Switching.
http://smallvoid.com/tweak/winnt/service/stuv.html#TERMSERVICE

Computer Browser service
Automatic, if on a network and there is no dedicated master browser.
Disabled, if not browsing Network Neighborhood for shares/printers.
http://smallvoid.com/tweak/winnt/service/abc.html#BROWSER

Fast User Switching Compatibility
Manual, and it will only be activated when a fast user switch is requested.
Otherwise disabled.
http://smallvoid.com/tweak/winnt/service/def.html#FUS

Server service
Automatic, if wanting to share files and printers.
Disabled, if no files to share.
http://smallvoid.com/tweak/winnt/service/stuv.html#SERVER

Workstation service
Automatic, when in a simple home network.
Disabled, if not needing access to network-shares
http://smallvoid.com/tweak/winnt/service/wxyz.html#WORKSTATION

Network Location Awareness
Disabled if not on a network.
http://smallvoid.com/tweak/winnt/service/mno.html#NLA

Remote Access Connection Manager
Disabled, if not using Modem, Virtual Private Networking(VPN) or Internet
Connection Sharing.
Manual, if wanting the ability to create such connections when required.
http://smallvoid.com/tweak/winnt/service/pqr.html#RASMAN

RunAs Service / Secondary Logon
Disabled, if not needing to start applications under another accounts
credentials.
Manual, if once in awhile need to start an application as another user (Like
Administrator).
Automatic, if constantly starting applications as another user, as it will
avoid slow application launch.
http://smallvoid.com/tweak/winnt/service/pqr.html#SECLOGON

Shell Hardware Detection
Disabled, unless having problems configuring your Autoplay.
http://smallvoid.com/tweak/winnt/service/stuv.html#SHELLHWDETECTION

Telephony
Disabled if not on a dialup modem.
http://smallvoid.com/tweak/winnt/service/stuv.html#TAPISRV

Logical Disk Manager service
Logical Disk Manager Watchdog Service that detects the
appearance/disappearance of hard drives and the partitions they contains.

Note if this service is stopped, then dynamic disk status and configuration
information might become outdated. Therefore if one is considering to change
this service state to Manual, then make sure that none of the disks in the
system are configured as dynamic disks.
http://smallvoid.com/tweak/winnt/service/jkl.html#DMSERVER

If you have none of the above, Logical Disk Manager service doesn't need to
run.

Error Reporting Service if don't want to give detailed information about
your computer to Microsoft every time an application crashes.
http://smallvoid.com/tweak/winnt/service/def.html#ERSVC

Distributed Link Tracking Client service
Disabled, if on a simple home network.
Automatic, if connected to a domain and uses a NTFS file system.
http://smallvoid.com/tweak/winnt/service/def.html#TRKWKS

Wireless Zero Configuration
Disabled, if not using wireless network with a 802.11 network device.
Automatic, if using wireless netwok AND manufacture of the netcard haven't
provided software of their own.
http://smallvoid.com/tweak/winnt/service/wxyz.html#WZCSVC

TCP/IP NetBIOS Helper service
Disabled, if on a simple home network (Even if using Netbios over TcpIp).
Automatic, if needing to login on to a domain using Netbios/WINS or using
the LmHosts-file.
http://smallvoid.com/tweak/winnt/service/stuv.html#LMHOSTS

Remote Registry service
Disabled, for security measures.
http://smallvoid.com/tweak/winnt/service/pqr.html#REMOTEREGISTRY

SSDP Discovery Service
Disabled, unless working with networked Universal Plug and Play devices or
using Internet Connection Sharing.
http://smallvoid.com/tweak/winnt/service/stuv.html#SSDPSRV

WebClient
Disabled.
http://smallvoid.com/tweak/winnt/service/wxyz.html#WEBCLIENT

You can look up recommendations for services here...

http://smallvoid.com/tweak/winnt/services.html

http://www.blackviper.com/WinXP/servicecfg.htm

--
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In
Trond Svendsen said:
Background; while installing WinXP recently, I installed Symantec
Antivirus Corp Edition 10.1.6.6000 /SAV) before installing any network
drivers. Then I started Windows Update, and installed the rest of my
software.
Just now I booted into safe mode, and ran a deep scan using SAV. No risks,
or viruses found.

I consider myself an experienced user, and I've (re)installed WinXP many
times, but this is the first time I've experienced this issue.

Here are a list of the SVCHOST.EXE running:

svchost.exe 952 DcomLaunch, TermService
svchost.exe 1020 RpcSs
svchost.exe 1060 AudioSrv, Browser, CryptSvc, Dhcp,
dmserver,
ERSvc, EventSystem,
FastUserSwitchingCompatibility, helpsvc,
lanmanserver, lanmanworkstation, Netman,
Nla, RasMan, Schedule, seclogon, SENS,
SharedAccess, ShellHWDetection, TapiSrv,
Themes, TrkWks, W32Time, winmgmt, wscsvc,
wuauserv, WZCSVC
svchost.exe 1156 Dnscache
svchost.exe 1232 LmHosts, RemoteRegistry, SSDPSRV,
WebClient
Best regards
Trond Svendsen
PID, process identifier, numbers change every time that you boot and PID
numbers are not necessarily the same from one machine to the next. PIDs
can be used with the netstat -ano command, for example, to see what PID
is what process in the Task Manager.

process identifier (PID)
[[A numerical identifier that uniquely distinguishes a process while it
runs. Use Task Manager to view PIDs.]]

The Network Service account is a special built-in account that has
reduced privileges similar to an authenticated user account. The actual
name of the
account is NT AUTHORITY\NetworkService.

Network Service uses this...
C:\WINDOWS\System32\svchost.exe -k NetworkService
to start svchost.exe to load DnsCache, the DNS Client service, which is
dnsrslvr.dll.

UPDATE your antivirus software and run a full system scan.

UPDATE whatever anti-spyware applications that you have and run a full
system scan with each one.

You might want to start in Safe Mode to run your antivirus and
anti-spyware
software.

Running a full system antivirus scan or anti-spyware scan in Safe Mode
can be a good idea. Some viruses and other malware like to conceal
themselves in areas Windows protects while using them. Safe mode can
prevent those applications access and therefore unprotect the viruses or
other malware allowing for easier removal.

''In safe mode, you have access to only basic files and drivers
(mouse, monitor, keyboard, mass storage, base video, default system
services), just the minimum device drivers required to start Windows.''

Because of that some malware does not load in Safe Mode and is easier to
get
rid of.

How to start Windows in Safe Mode Windows XP
http://www.bleepingcomputer.com/forums/index.php?showtutorial=61#winxo

--
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In
Trond Svendsen said:
It's SVCHOST.EXE (PID 1212)

Best regards Trond Svendsen

Hi Trond,

What is the Image name (exe) that belongs to the NETWORK SERVICE that
is maxing out? You can use view / Select Columns to get more info from
task manager.

CreateWindow
http://justpageprobe.com
The FREE Web page utility you always wanted.
Keep your router connected.
Email your IP to where you need it.
Test your enterprise Web Servers.
Plus lots more




After my last re-installation of Windows XP SP2 (all updates applied),
PID 1212 is slowly increasing in memory usage, until the whole OS just
acts up and I have to re-boot the laptop.

What does PID 1212 (Network Service) do, and can I stop it from
happening, besides re-installing again?

Regards
Trond Svendsen
 
Wes,

Yes, I'm on a home network running on wireless. I have two computers
running, and they both connect to inet using a wireless accesspoint. I also
have RDP enabled on both on them.

I've been monitoring the services, and it seems like it's RpcSS.dll that is
slowly but shurely increasing with 4K at a time, until the OS is left
useless.

Best regards
Trond Svendsen
Hi Trond,

I question why you have these services running. Maybe you need them. Are
you on a network? On dialup?

TermService = Terminal Services
Browser = Computer Browser service
FastUserSwitchingCompatibility = Fast User Switching Compatibility service
lanmanserver = Server service
lanmanworkstation = Workstation service
Nla = Network Location Awareness service
RasMan = Remote Access Connection Manager service
seclogon = RunAs Service / Secondary Logon service
ShellHWDetection = Shell Hardware Detection service
TapiSrv = Telephony service
dmserver = Logical Disk Manager service
ERSvc = Error Reporting Service
TrkWks = Distributed Link Tracking Client service
WZCSVC = Wireless Zero Configuration service
LmHosts = TCP/IP NetBIOS Helper service
RemoteRegistry = Remote Registry service
SSDPSRV = SSDP Discovery Service
WebClient = WebClient service

If not on a network, I would disable the following services:

Terminal Services
Disabled, for security measures.
Manual, if using Remote Desktop (Remote Administration), Remote
Assistance, Fast User Switching.
http://smallvoid.com/tweak/winnt/service/stuv.html#TERMSERVICE

Computer Browser service
Automatic, if on a network and there is no dedicated master browser.
Disabled, if not browsing Network Neighborhood for shares/printers.
http://smallvoid.com/tweak/winnt/service/abc.html#BROWSER

Fast User Switching Compatibility
Manual, and it will only be activated when a fast user switch is
requested. Otherwise disabled.
http://smallvoid.com/tweak/winnt/service/def.html#FUS

Server service
Automatic, if wanting to share files and printers.
Disabled, if no files to share.
http://smallvoid.com/tweak/winnt/service/stuv.html#SERVER

Workstation service
Automatic, when in a simple home network.
Disabled, if not needing access to network-shares
http://smallvoid.com/tweak/winnt/service/wxyz.html#WORKSTATION

Network Location Awareness
Disabled if not on a network.
http://smallvoid.com/tweak/winnt/service/mno.html#NLA

Remote Access Connection Manager
Disabled, if not using Modem, Virtual Private Networking(VPN) or Internet
Connection Sharing.
Manual, if wanting the ability to create such connections when required.
http://smallvoid.com/tweak/winnt/service/pqr.html#RASMAN

RunAs Service / Secondary Logon
Disabled, if not needing to start applications under another accounts
credentials.
Manual, if once in awhile need to start an application as another user
(Like Administrator).
Automatic, if constantly starting applications as another user, as it will
avoid slow application launch.
http://smallvoid.com/tweak/winnt/service/pqr.html#SECLOGON

Shell Hardware Detection
Disabled, unless having problems configuring your Autoplay.
http://smallvoid.com/tweak/winnt/service/stuv.html#SHELLHWDETECTION

Telephony
Disabled if not on a dialup modem.
http://smallvoid.com/tweak/winnt/service/stuv.html#TAPISRV

Logical Disk Manager service
Logical Disk Manager Watchdog Service that detects the
appearance/disappearance of hard drives and the partitions they contains.

Note if this service is stopped, then dynamic disk status and
configuration information might become outdated. Therefore if one is
considering to change this service state to Manual, then make sure that
none of the disks in the system are configured as dynamic disks.
http://smallvoid.com/tweak/winnt/service/jkl.html#DMSERVER

If you have none of the above, Logical Disk Manager service doesn't need
to run.

Error Reporting Service if don't want to give detailed information about
your computer to Microsoft every time an application crashes.
http://smallvoid.com/tweak/winnt/service/def.html#ERSVC

Distributed Link Tracking Client service
Disabled, if on a simple home network.
Automatic, if connected to a domain and uses a NTFS file system.
http://smallvoid.com/tweak/winnt/service/def.html#TRKWKS

Wireless Zero Configuration
Disabled, if not using wireless network with a 802.11 network device.
Automatic, if using wireless netwok AND manufacture of the netcard haven't
provided software of their own.
http://smallvoid.com/tweak/winnt/service/wxyz.html#WZCSVC

TCP/IP NetBIOS Helper service
Disabled, if on a simple home network (Even if using Netbios over TcpIp).
Automatic, if needing to login on to a domain using Netbios/WINS or using
the LmHosts-file.
http://smallvoid.com/tweak/winnt/service/stuv.html#LMHOSTS

Remote Registry service
Disabled, for security measures.
http://smallvoid.com/tweak/winnt/service/pqr.html#REMOTEREGISTRY

SSDP Discovery Service
Disabled, unless working with networked Universal Plug and Play devices or
using Internet Connection Sharing.
http://smallvoid.com/tweak/winnt/service/stuv.html#SSDPSRV

WebClient
Disabled.
http://smallvoid.com/tweak/winnt/service/wxyz.html#WEBCLIENT

You can look up recommendations for services here...

http://smallvoid.com/tweak/winnt/services.html

http://www.blackviper.com/WinXP/servicecfg.htm

--
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In
Trond Svendsen said:
Background; while installing WinXP recently, I installed Symantec
Antivirus Corp Edition 10.1.6.6000 /SAV) before installing any network
drivers. Then I started Windows Update, and installed the rest of my
software.
Just now I booted into safe mode, and ran a deep scan using SAV. No
risks,
or viruses found.

I consider myself an experienced user, and I've (re)installed WinXP many
times, but this is the first time I've experienced this issue.

Here are a list of the SVCHOST.EXE running:

svchost.exe 952 DcomLaunch, TermService
svchost.exe 1020 RpcSs
svchost.exe 1060 AudioSrv, Browser, CryptSvc, Dhcp,
dmserver,
ERSvc, EventSystem,
FastUserSwitchingCompatibility, helpsvc,
lanmanserver, lanmanworkstation, Netman,
Nla, RasMan, Schedule, seclogon, SENS,
SharedAccess, ShellHWDetection, TapiSrv,
Themes, TrkWks, W32Time, winmgmt, wscsvc,
wuauserv, WZCSVC
svchost.exe 1156 Dnscache
svchost.exe 1232 LmHosts, RemoteRegistry, SSDPSRV,
WebClient
Best regards
Trond Svendsen
PID, process identifier, numbers change every time that you boot and PID
numbers are not necessarily the same from one machine to the next. PIDs
can be used with the netstat -ano command, for example, to see what PID
is what process in the Task Manager.

process identifier (PID)
[[A numerical identifier that uniquely distinguishes a process while it
runs. Use Task Manager to view PIDs.]]

The Network Service account is a special built-in account that has
reduced privileges similar to an authenticated user account. The actual
name of the
account is NT AUTHORITY\NetworkService.

Network Service uses this...
C:\WINDOWS\System32\svchost.exe -k NetworkService
to start svchost.exe to load DnsCache, the DNS Client service, which is
dnsrslvr.dll.

UPDATE your antivirus software and run a full system scan.

UPDATE whatever anti-spyware applications that you have and run a full
system scan with each one.

You might want to start in Safe Mode to run your antivirus and
anti-spyware
software.

Running a full system antivirus scan or anti-spyware scan in Safe Mode
can be a good idea. Some viruses and other malware like to conceal
themselves in areas Windows protects while using them. Safe mode can
prevent those applications access and therefore unprotect the viruses or
other malware allowing for easier removal.

''In safe mode, you have access to only basic files and drivers
(mouse, monitor, keyboard, mass storage, base video, default system
services), just the minimum device drivers required to start Windows.''

Because of that some malware does not load in Safe Mode and is easier to
get
rid of.

How to start Windows in Safe Mode Windows XP
http://www.bleepingcomputer.com/forums/index.php?showtutorial=61#winxo

--
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In Trond Svendsen <[email protected]> hunted and pecked:
It's SVCHOST.EXE (PID 1212)

Best regards Trond Svendsen

Hi Trond,

What is the Image name (exe) that belongs to the NETWORK SERVICE that
is maxing out? You can use view / Select Columns to get more info from
task manager.

CreateWindow
http://justpageprobe.com
The FREE Web page utility you always wanted.
Keep your router connected.
Email your IP to where you need it.
Test your enterprise Web Servers.
Plus lots more




After my last re-installation of Windows XP SP2 (all updates
applied),
PID 1212 is slowly increasing in memory usage, until the whole OS
just
acts up and I have to re-boot the laptop.

What does PID 1212 (Network Service) do, and can I stop it from
happening, besides re-installing again?

Regards
Trond Svendsen
 
Hi Trond,

RpcSS.dll is Distributed COM Services. RpcSS.dll is related to DcomLaunch
(DCOM Server Process Launcher service) and RpcSs (Remote Procedure Call
(RPC) service). Both are neccesary services.

RpcSS.dll is also related to the Blaster worm.

Search the Support Knowledge Base (KB)
Search Product: Windows XP
For: RpcSS.dll
http://support.microsoft.com/search...=1,2,3,4,7,10,12&mode=a&adv=1&spid=1173&range

--
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In
Trond Svendsen said:
Wes,

Yes, I'm on a home network running on wireless. I have two computers
running, and they both connect to inet using a wireless accesspoint. I
also have RDP enabled on both on them.

I've been monitoring the services, and it seems like it's RpcSS.dll that
is slowly but shurely increasing with 4K at a time, until the OS is left
useless.

Best regards
Trond Svendsen
Hi Trond,

I question why you have these services running. Maybe you need them. Are
you on a network? On dialup?

TermService = Terminal Services
Browser = Computer Browser service
FastUserSwitchingCompatibility = Fast User Switching Compatibility
service lanmanserver = Server service
lanmanworkstation = Workstation service
Nla = Network Location Awareness service
RasMan = Remote Access Connection Manager service
seclogon = RunAs Service / Secondary Logon service
ShellHWDetection = Shell Hardware Detection service
TapiSrv = Telephony service
dmserver = Logical Disk Manager service
ERSvc = Error Reporting Service
TrkWks = Distributed Link Tracking Client service
WZCSVC = Wireless Zero Configuration service
LmHosts = TCP/IP NetBIOS Helper service
RemoteRegistry = Remote Registry service
SSDPSRV = SSDP Discovery Service
WebClient = WebClient service

If not on a network, I would disable the following services:

Terminal Services
Disabled, for security measures.
Manual, if using Remote Desktop (Remote Administration), Remote
Assistance, Fast User Switching.
http://smallvoid.com/tweak/winnt/service/stuv.html#TERMSERVICE

Computer Browser service
Automatic, if on a network and there is no dedicated master browser.
Disabled, if not browsing Network Neighborhood for shares/printers.
http://smallvoid.com/tweak/winnt/service/abc.html#BROWSER

Fast User Switching Compatibility
Manual, and it will only be activated when a fast user switch is
requested. Otherwise disabled.
http://smallvoid.com/tweak/winnt/service/def.html#FUS

Server service
Automatic, if wanting to share files and printers.
Disabled, if no files to share.
http://smallvoid.com/tweak/winnt/service/stuv.html#SERVER

Workstation service
Automatic, when in a simple home network.
Disabled, if not needing access to network-shares
http://smallvoid.com/tweak/winnt/service/wxyz.html#WORKSTATION

Network Location Awareness
Disabled if not on a network.
http://smallvoid.com/tweak/winnt/service/mno.html#NLA

Remote Access Connection Manager
Disabled, if not using Modem, Virtual Private Networking(VPN) or Internet
Connection Sharing.
Manual, if wanting the ability to create such connections when required.
http://smallvoid.com/tweak/winnt/service/pqr.html#RASMAN

RunAs Service / Secondary Logon
Disabled, if not needing to start applications under another accounts
credentials.
Manual, if once in awhile need to start an application as another user
(Like Administrator).
Automatic, if constantly starting applications as another user, as it
will avoid slow application launch.
http://smallvoid.com/tweak/winnt/service/pqr.html#SECLOGON

Shell Hardware Detection
Disabled, unless having problems configuring your Autoplay.
http://smallvoid.com/tweak/winnt/service/stuv.html#SHELLHWDETECTION

Telephony
Disabled if not on a dialup modem.
http://smallvoid.com/tweak/winnt/service/stuv.html#TAPISRV

Logical Disk Manager service
Logical Disk Manager Watchdog Service that detects the
appearance/disappearance of hard drives and the partitions they contains.

Note if this service is stopped, then dynamic disk status and
configuration information might become outdated. Therefore if one is
considering to change this service state to Manual, then make sure that
none of the disks in the system are configured as dynamic disks.
http://smallvoid.com/tweak/winnt/service/jkl.html#DMSERVER

If you have none of the above, Logical Disk Manager service doesn't need
to run.

Error Reporting Service if don't want to give detailed information about
your computer to Microsoft every time an application crashes.
http://smallvoid.com/tweak/winnt/service/def.html#ERSVC

Distributed Link Tracking Client service
Disabled, if on a simple home network.
Automatic, if connected to a domain and uses a NTFS file system.
http://smallvoid.com/tweak/winnt/service/def.html#TRKWKS

Wireless Zero Configuration
Disabled, if not using wireless network with a 802.11 network device.
Automatic, if using wireless netwok AND manufacture of the netcard
haven't provided software of their own.
http://smallvoid.com/tweak/winnt/service/wxyz.html#WZCSVC

TCP/IP NetBIOS Helper service
Disabled, if on a simple home network (Even if using Netbios over TcpIp).
Automatic, if needing to login on to a domain using Netbios/WINS or using
the LmHosts-file.
http://smallvoid.com/tweak/winnt/service/stuv.html#LMHOSTS

Remote Registry service
Disabled, for security measures.
http://smallvoid.com/tweak/winnt/service/pqr.html#REMOTEREGISTRY

SSDP Discovery Service
Disabled, unless working with networked Universal Plug and Play devices
or using Internet Connection Sharing.
http://smallvoid.com/tweak/winnt/service/stuv.html#SSDPSRV

WebClient
Disabled.
http://smallvoid.com/tweak/winnt/service/wxyz.html#WEBCLIENT

You can look up recommendations for services here...

http://smallvoid.com/tweak/winnt/services.html

http://www.blackviper.com/WinXP/servicecfg.htm

--
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In
Trond Svendsen said:
Background; while installing WinXP recently, I installed Symantec
Antivirus Corp Edition 10.1.6.6000 /SAV) before installing any network
drivers. Then I started Windows Update, and installed the rest of my
software.
Just now I booted into safe mode, and ran a deep scan using SAV. No
risks,
or viruses found.

I consider myself an experienced user, and I've (re)installed WinXP many
times, but this is the first time I've experienced this issue.

Here are a list of the SVCHOST.EXE running:

svchost.exe 952 DcomLaunch, TermService
svchost.exe 1020 RpcSs
svchost.exe 1060 AudioSrv, Browser, CryptSvc, Dhcp,
dmserver,
ERSvc, EventSystem,
FastUserSwitchingCompatibility, helpsvc,
lanmanserver, lanmanworkstation, Netman,
Nla, RasMan, Schedule, seclogon, SENS,
SharedAccess, ShellHWDetection, TapiSrv,
Themes, TrkWks, W32Time, winmgmt,
wscsvc, wuauserv, WZCSVC
svchost.exe 1156 Dnscache
svchost.exe 1232 LmHosts, RemoteRegistry, SSDPSRV,
WebClient
Best regards
Trond Svendsen

PID, process identifier, numbers change every time that you boot and
PID numbers are not necessarily the same from one machine to the next.
PIDs can be used with the netstat -ano command, for example, to see
what PID is what process in the Task Manager.

process identifier (PID)
[[A numerical identifier that uniquely distinguishes a process while it
runs. Use Task Manager to view PIDs.]]

The Network Service account is a special built-in account that has
reduced privileges similar to an authenticated user account. The
actual name of the
account is NT AUTHORITY\NetworkService.

Network Service uses this...
C:\WINDOWS\System32\svchost.exe -k NetworkService
to start svchost.exe to load DnsCache, the DNS Client service, which is
dnsrslvr.dll.

UPDATE your antivirus software and run a full system scan.

UPDATE whatever anti-spyware applications that you have and run a full
system scan with each one.

You might want to start in Safe Mode to run your antivirus and
anti-spyware
software.

Running a full system antivirus scan or anti-spyware scan in Safe Mode
can be a good idea. Some viruses and other malware like to conceal
themselves in areas Windows protects while using them. Safe mode can
prevent those applications access and therefore unprotect the viruses
or other malware allowing for easier removal.

''In safe mode, you have access to only basic files and drivers
(mouse, monitor, keyboard, mass storage, base video, default system
services), just the minimum device drivers required to start Windows.''

Because of that some malware does not load in Safe Mode and is easier
to get
rid of.

How to start Windows in Safe Mode Windows XP
http://www.bleepingcomputer.com/forums/index.php?showtutorial=61#winxo

--
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In Trond Svendsen <[email protected]> hunted and pecked:
It's SVCHOST.EXE (PID 1212)

Best regards Trond Svendsen

Hi Trond,

What is the Image name (exe) that belongs to the NETWORK SERVICE that
is maxing out? You can use view / Select Columns to get more info
from task manager.

CreateWindow
http://justpageprobe.com
The FREE Web page utility you always wanted.
Keep your router connected.
Email your IP to where you need it.
Test your enterprise Web Servers.
Plus lots more




After my last re-installation of Windows XP SP2 (all updates
applied),
PID 1212 is slowly increasing in memory usage, until the whole OS
just
acts up and I have to re-boot the laptop.

What does PID 1212 (Network Service) do, and can I stop it from
happening, besides re-installing again?

Regards
Trond Svendsen
 
I can see that SVCHOST.EXE that hosts RPSCC.DLL can cause a memory leak on
Windows 2003 servers, but could it affect Windows XP as well? I couldn't
find any information, or a hotfix for this.

I presume the Blaster Worm would show up on either Symantec Antivirus or the
Malicious Removal Tool?

Trond

Wesley Vogel said:
Hi Trond,

RpcSS.dll is Distributed COM Services. RpcSS.dll is related to DcomLaunch
(DCOM Server Process Launcher service) and RpcSs (Remote Procedure Call
(RPC) service). Both are neccesary services.

RpcSS.dll is also related to the Blaster worm.

Search the Support Knowledge Base (KB)
Search Product: Windows XP
For: RpcSS.dll
http://support.microsoft.com/search...=1,2,3,4,7,10,12&mode=a&adv=1&spid=1173&range

--
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In
Trond Svendsen said:
Wes,

Yes, I'm on a home network running on wireless. I have two computers
running, and they both connect to inet using a wireless accesspoint. I
also have RDP enabled on both on them.

I've been monitoring the services, and it seems like it's RpcSS.dll that
is slowly but shurely increasing with 4K at a time, until the OS is left
useless.

Best regards
Trond Svendsen
Hi Trond,

I question why you have these services running. Maybe you need them.
Are you on a network? On dialup?

TermService = Terminal Services
Browser = Computer Browser service
FastUserSwitchingCompatibility = Fast User Switching Compatibility
service lanmanserver = Server service
lanmanworkstation = Workstation service
Nla = Network Location Awareness service
RasMan = Remote Access Connection Manager service
seclogon = RunAs Service / Secondary Logon service
ShellHWDetection = Shell Hardware Detection service
TapiSrv = Telephony service
dmserver = Logical Disk Manager service
ERSvc = Error Reporting Service
TrkWks = Distributed Link Tracking Client service
WZCSVC = Wireless Zero Configuration service
LmHosts = TCP/IP NetBIOS Helper service
RemoteRegistry = Remote Registry service
SSDPSRV = SSDP Discovery Service
WebClient = WebClient service

If not on a network, I would disable the following services:

Terminal Services
Disabled, for security measures.
Manual, if using Remote Desktop (Remote Administration), Remote
Assistance, Fast User Switching.
http://smallvoid.com/tweak/winnt/service/stuv.html#TERMSERVICE

Computer Browser service
Automatic, if on a network and there is no dedicated master browser.
Disabled, if not browsing Network Neighborhood for shares/printers.
http://smallvoid.com/tweak/winnt/service/abc.html#BROWSER

Fast User Switching Compatibility
Manual, and it will only be activated when a fast user switch is
requested. Otherwise disabled.
http://smallvoid.com/tweak/winnt/service/def.html#FUS

Server service
Automatic, if wanting to share files and printers.
Disabled, if no files to share.
http://smallvoid.com/tweak/winnt/service/stuv.html#SERVER

Workstation service
Automatic, when in a simple home network.
Disabled, if not needing access to network-shares
http://smallvoid.com/tweak/winnt/service/wxyz.html#WORKSTATION

Network Location Awareness
Disabled if not on a network.
http://smallvoid.com/tweak/winnt/service/mno.html#NLA

Remote Access Connection Manager
Disabled, if not using Modem, Virtual Private Networking(VPN) or
Internet
Connection Sharing.
Manual, if wanting the ability to create such connections when required.
http://smallvoid.com/tweak/winnt/service/pqr.html#RASMAN

RunAs Service / Secondary Logon
Disabled, if not needing to start applications under another accounts
credentials.
Manual, if once in awhile need to start an application as another user
(Like Administrator).
Automatic, if constantly starting applications as another user, as it
will avoid slow application launch.
http://smallvoid.com/tweak/winnt/service/pqr.html#SECLOGON

Shell Hardware Detection
Disabled, unless having problems configuring your Autoplay.
http://smallvoid.com/tweak/winnt/service/stuv.html#SHELLHWDETECTION

Telephony
Disabled if not on a dialup modem.
http://smallvoid.com/tweak/winnt/service/stuv.html#TAPISRV

Logical Disk Manager service
Logical Disk Manager Watchdog Service that detects the
appearance/disappearance of hard drives and the partitions they
contains.

Note if this service is stopped, then dynamic disk status and
configuration information might become outdated. Therefore if one is
considering to change this service state to Manual, then make sure that
none of the disks in the system are configured as dynamic disks.
http://smallvoid.com/tweak/winnt/service/jkl.html#DMSERVER

If you have none of the above, Logical Disk Manager service doesn't need
to run.

Error Reporting Service if don't want to give detailed information about
your computer to Microsoft every time an application crashes.
http://smallvoid.com/tweak/winnt/service/def.html#ERSVC

Distributed Link Tracking Client service
Disabled, if on a simple home network.
Automatic, if connected to a domain and uses a NTFS file system.
http://smallvoid.com/tweak/winnt/service/def.html#TRKWKS

Wireless Zero Configuration
Disabled, if not using wireless network with a 802.11 network device.
Automatic, if using wireless netwok AND manufacture of the netcard
haven't provided software of their own.
http://smallvoid.com/tweak/winnt/service/wxyz.html#WZCSVC

TCP/IP NetBIOS Helper service
Disabled, if on a simple home network (Even if using Netbios over
TcpIp).
Automatic, if needing to login on to a domain using Netbios/WINS or
using
the LmHosts-file.
http://smallvoid.com/tweak/winnt/service/stuv.html#LMHOSTS

Remote Registry service
Disabled, for security measures.
http://smallvoid.com/tweak/winnt/service/pqr.html#REMOTEREGISTRY

SSDP Discovery Service
Disabled, unless working with networked Universal Plug and Play devices
or using Internet Connection Sharing.
http://smallvoid.com/tweak/winnt/service/stuv.html#SSDPSRV

WebClient
Disabled.
http://smallvoid.com/tweak/winnt/service/wxyz.html#WEBCLIENT

You can look up recommendations for services here...

http://smallvoid.com/tweak/winnt/services.html

http://www.blackviper.com/WinXP/servicecfg.htm

--
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In Trond Svendsen <[email protected]> hunted and pecked:
Background; while installing WinXP recently, I installed Symantec
Antivirus Corp Edition 10.1.6.6000 /SAV) before installing any network
drivers. Then I started Windows Update, and installed the rest of my
software.
Just now I booted into safe mode, and ran a deep scan using SAV. No
risks,
or viruses found.

I consider myself an experienced user, and I've (re)installed WinXP
many
times, but this is the first time I've experienced this issue.

Here are a list of the SVCHOST.EXE running:

svchost.exe 952 DcomLaunch, TermService
svchost.exe 1020 RpcSs
svchost.exe 1060 AudioSrv, Browser, CryptSvc, Dhcp,
dmserver,
ERSvc, EventSystem,
FastUserSwitchingCompatibility,
helpsvc,
lanmanserver, lanmanworkstation,
Netman,
Nla, RasMan, Schedule, seclogon, SENS,
SharedAccess, ShellHWDetection,
TapiSrv,
Themes, TrkWks, W32Time, winmgmt,
wscsvc, wuauserv, WZCSVC
svchost.exe 1156 Dnscache
svchost.exe 1232 LmHosts, RemoteRegistry, SSDPSRV,
WebClient
Best regards
Trond Svendsen

PID, process identifier, numbers change every time that you boot and
PID numbers are not necessarily the same from one machine to the next.
PIDs can be used with the netstat -ano command, for example, to see
what PID is what process in the Task Manager.

process identifier (PID)
[[A numerical identifier that uniquely distinguishes a process while
it
runs. Use Task Manager to view PIDs.]]

The Network Service account is a special built-in account that has
reduced privileges similar to an authenticated user account. The
actual name of the
account is NT AUTHORITY\NetworkService.

Network Service uses this...
C:\WINDOWS\System32\svchost.exe -k NetworkService
to start svchost.exe to load DnsCache, the DNS Client service, which
is
dnsrslvr.dll.

UPDATE your antivirus software and run a full system scan.

UPDATE whatever anti-spyware applications that you have and run a full
system scan with each one.

You might want to start in Safe Mode to run your antivirus and
anti-spyware
software.

Running a full system antivirus scan or anti-spyware scan in Safe Mode
can be a good idea. Some viruses and other malware like to conceal
themselves in areas Windows protects while using them. Safe mode can
prevent those applications access and therefore unprotect the viruses
or other malware allowing for easier removal.

''In safe mode, you have access to only basic files and drivers
(mouse, monitor, keyboard, mass storage, base video, default system
services), just the minimum device drivers required to start
Windows.''

Because of that some malware does not load in Safe Mode and is easier
to get
rid of.

How to start Windows in Safe Mode Windows XP
http://www.bleepingcomputer.com/forums/index.php?showtutorial=61#winxo

--
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In Trond Svendsen <[email protected]> hunted and pecked:
It's SVCHOST.EXE (PID 1212)

Best regards Trond Svendsen

Hi Trond,

What is the Image name (exe) that belongs to the NETWORK SERVICE
that
is maxing out? You can use view / Select Columns to get more info
from task manager.

CreateWindow
http://justpageprobe.com
The FREE Web page utility you always wanted.
Keep your router connected.
Email your IP to where you need it.
Test your enterprise Web Servers.
Plus lots more




After my last re-installation of Windows XP SP2 (all updates
applied),
PID 1212 is slowly increasing in memory usage, until the whole OS
just
acts up and I have to re-boot the laptop.

What does PID 1212 (Network Service) do, and can I stop it from
happening, besides re-installing again?

Regards
Trond Svendsen
 
I can see that SVCHOST.EXE that hosts RPSCC.DLL can cause a memory leak on
Windows 2003 servers, but could it affect Windows XP as well? I couldn't
find any information, or a hotfix for this.

Honestly, it beats me.
I presume the Blaster Worm would show up on either Symantec Antivirus or
the Malicious Removal Tool?

I would assume that also.

--
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In
Trond Svendsen said:
I can see that SVCHOST.EXE that hosts RPSCC.DLL can cause a memory leak on
Windows 2003 servers, but could it affect Windows XP as well? I couldn't
find any information, or a hotfix for this.

I presume the Blaster Worm would show up on either Symantec Antivirus or
the Malicious Removal Tool?

Trond

Wesley Vogel said:
Hi Trond,

RpcSS.dll is Distributed COM Services. RpcSS.dll is related to
DcomLaunch (DCOM Server Process Launcher service) and RpcSs (Remote
Procedure Call (RPC) service). Both are neccesary services.

RpcSS.dll is also related to the Blaster worm.

Search the Support Knowledge Base (KB)
Search Product: Windows XP
For: RpcSS.dll
http://support.microsoft.com/search...=1,2,3,4,7,10,12&mode=a&adv=1&spid=1173&range

--
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In
Trond Svendsen said:
Wes,

Yes, I'm on a home network running on wireless. I have two computers
running, and they both connect to inet using a wireless accesspoint. I
also have RDP enabled on both on them.

I've been monitoring the services, and it seems like it's RpcSS.dll that
is slowly but shurely increasing with 4K at a time, until the OS is left
useless.

Best regards
Trond Svendsen

Hi Trond,

I question why you have these services running. Maybe you need them.
Are you on a network? On dialup?

TermService = Terminal Services
Browser = Computer Browser service
FastUserSwitchingCompatibility = Fast User Switching Compatibility
service lanmanserver = Server service
lanmanworkstation = Workstation service
Nla = Network Location Awareness service
RasMan = Remote Access Connection Manager service
seclogon = RunAs Service / Secondary Logon service
ShellHWDetection = Shell Hardware Detection service
TapiSrv = Telephony service
dmserver = Logical Disk Manager service
ERSvc = Error Reporting Service
TrkWks = Distributed Link Tracking Client service
WZCSVC = Wireless Zero Configuration service
LmHosts = TCP/IP NetBIOS Helper service
RemoteRegistry = Remote Registry service
SSDPSRV = SSDP Discovery Service
WebClient = WebClient service

If not on a network, I would disable the following services:

Terminal Services
Disabled, for security measures.
Manual, if using Remote Desktop (Remote Administration), Remote
Assistance, Fast User Switching.
http://smallvoid.com/tweak/winnt/service/stuv.html#TERMSERVICE

Computer Browser service
Automatic, if on a network and there is no dedicated master browser.
Disabled, if not browsing Network Neighborhood for shares/printers.
http://smallvoid.com/tweak/winnt/service/abc.html#BROWSER

Fast User Switching Compatibility
Manual, and it will only be activated when a fast user switch is
requested. Otherwise disabled.
http://smallvoid.com/tweak/winnt/service/def.html#FUS

Server service
Automatic, if wanting to share files and printers.
Disabled, if no files to share.
http://smallvoid.com/tweak/winnt/service/stuv.html#SERVER

Workstation service
Automatic, when in a simple home network.
Disabled, if not needing access to network-shares
http://smallvoid.com/tweak/winnt/service/wxyz.html#WORKSTATION

Network Location Awareness
Disabled if not on a network.
http://smallvoid.com/tweak/winnt/service/mno.html#NLA

Remote Access Connection Manager
Disabled, if not using Modem, Virtual Private Networking(VPN) or
Internet
Connection Sharing.
Manual, if wanting the ability to create such connections when
required. http://smallvoid.com/tweak/winnt/service/pqr.html#RASMAN

RunAs Service / Secondary Logon
Disabled, if not needing to start applications under another accounts
credentials.
Manual, if once in awhile need to start an application as another user
(Like Administrator).
Automatic, if constantly starting applications as another user, as it
will avoid slow application launch.
http://smallvoid.com/tweak/winnt/service/pqr.html#SECLOGON

Shell Hardware Detection
Disabled, unless having problems configuring your Autoplay.
http://smallvoid.com/tweak/winnt/service/stuv.html#SHELLHWDETECTION

Telephony
Disabled if not on a dialup modem.
http://smallvoid.com/tweak/winnt/service/stuv.html#TAPISRV

Logical Disk Manager service
Logical Disk Manager Watchdog Service that detects the
appearance/disappearance of hard drives and the partitions they
contains.

Note if this service is stopped, then dynamic disk status and
configuration information might become outdated. Therefore if one is
considering to change this service state to Manual, then make sure that
none of the disks in the system are configured as dynamic disks.
http://smallvoid.com/tweak/winnt/service/jkl.html#DMSERVER

If you have none of the above, Logical Disk Manager service doesn't
need to run.

Error Reporting Service if don't want to give detailed information
about your computer to Microsoft every time an application crashes.
http://smallvoid.com/tweak/winnt/service/def.html#ERSVC

Distributed Link Tracking Client service
Disabled, if on a simple home network.
Automatic, if connected to a domain and uses a NTFS file system.
http://smallvoid.com/tweak/winnt/service/def.html#TRKWKS

Wireless Zero Configuration
Disabled, if not using wireless network with a 802.11 network device.
Automatic, if using wireless netwok AND manufacture of the netcard
haven't provided software of their own.
http://smallvoid.com/tweak/winnt/service/wxyz.html#WZCSVC

TCP/IP NetBIOS Helper service
Disabled, if on a simple home network (Even if using Netbios over
TcpIp).
Automatic, if needing to login on to a domain using Netbios/WINS or
using
the LmHosts-file.
http://smallvoid.com/tweak/winnt/service/stuv.html#LMHOSTS

Remote Registry service
Disabled, for security measures.
http://smallvoid.com/tweak/winnt/service/pqr.html#REMOTEREGISTRY

SSDP Discovery Service
Disabled, unless working with networked Universal Plug and Play devices
or using Internet Connection Sharing.
http://smallvoid.com/tweak/winnt/service/stuv.html#SSDPSRV

WebClient
Disabled.
http://smallvoid.com/tweak/winnt/service/wxyz.html#WEBCLIENT

You can look up recommendations for services here...

http://smallvoid.com/tweak/winnt/services.html

http://www.blackviper.com/WinXP/servicecfg.htm

--
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In Trond Svendsen <[email protected]> hunted and pecked:
Background; while installing WinXP recently, I installed Symantec
Antivirus Corp Edition 10.1.6.6000 /SAV) before installing any network
drivers. Then I started Windows Update, and installed the rest of my
software.
Just now I booted into safe mode, and ran a deep scan using SAV. No
risks,
or viruses found.

I consider myself an experienced user, and I've (re)installed WinXP
many
times, but this is the first time I've experienced this issue.

Here are a list of the SVCHOST.EXE running:

svchost.exe 952 DcomLaunch, TermService
svchost.exe 1020 RpcSs
svchost.exe 1060 AudioSrv, Browser, CryptSvc, Dhcp,
dmserver,
ERSvc, EventSystem,
FastUserSwitchingCompatibility,
helpsvc,
lanmanserver, lanmanworkstation,
Netman,
Nla, RasMan, Schedule, seclogon, SENS,
SharedAccess, ShellHWDetection,
TapiSrv,
Themes, TrkWks, W32Time, winmgmt,
wscsvc, wuauserv, WZCSVC
svchost.exe 1156 Dnscache
svchost.exe 1232 LmHosts, RemoteRegistry, SSDPSRV,
WebClient
Best regards
Trond Svendsen

PID, process identifier, numbers change every time that you boot and
PID numbers are not necessarily the same from one machine to the
next. PIDs can be used with the netstat -ano command, for example,
to see what PID is what process in the Task Manager.

process identifier (PID)
[[A numerical identifier that uniquely distinguishes a process while
it
runs. Use Task Manager to view PIDs.]]

The Network Service account is a special built-in account that has
reduced privileges similar to an authenticated user account. The
actual name of the
account is NT AUTHORITY\NetworkService.

Network Service uses this...
C:\WINDOWS\System32\svchost.exe -k NetworkService
to start svchost.exe to load DnsCache, the DNS Client service, which
is
dnsrslvr.dll.

UPDATE your antivirus software and run a full system scan.

UPDATE whatever anti-spyware applications that you have and run a
full system scan with each one.

You might want to start in Safe Mode to run your antivirus and
anti-spyware
software.

Running a full system antivirus scan or anti-spyware scan in Safe
Mode can be a good idea. Some viruses and other malware like to
conceal themselves in areas Windows protects while using them. Safe
mode can prevent those applications access and therefore unprotect
the viruses or other malware allowing for easier removal.

''In safe mode, you have access to only basic files and drivers
(mouse, monitor, keyboard, mass storage, base video, default system
services), just the minimum device drivers required to start
Windows.''

Because of that some malware does not load in Safe Mode and is easier
to get
rid of.

How to start Windows in Safe Mode Windows XP
http://www.bleepingcomputer.com/forums/index.php?showtutorial=61#winxo

--
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In Trond Svendsen <[email protected]> hunted and pecked:
It's SVCHOST.EXE (PID 1212)

Best regards Trond Svendsen

Hi Trond,

What is the Image name (exe) that belongs to the NETWORK SERVICE
that
is maxing out? You can use view / Select Columns to get more info
from task manager.

CreateWindow
http://justpageprobe.com
The FREE Web page utility you always wanted.
Keep your router connected.
Email your IP to where you need it.
Test your enterprise Web Servers.
Plus lots more




After my last re-installation of Windows XP SP2 (all updates
applied),
PID 1212 is slowly increasing in memory usage, until the whole OS
just
acts up and I have to re-boot the laptop.

What does PID 1212 (Network Service) do, and can I stop it from
happening, besides re-installing again?

Regards
Trond Svendsen
 
Hi

I too am experiencing the slow memory leak in SVCHOST.EXE, although I
wouldn't call it slow. I have to reboot at least every two days.
I run WinXP Pro with SP2, AVG for virus protection, ZoneAlarm firewall as
well as the Netgear hardware firewall, and Ad-aware for spyware.
RPCSS is the process in SVCHOST that is eating up my RAM. I can also tell
you that it is listening on 0.0.0.0:135, whatever that means.
In what may only be a coincidence, I can't install the latest .Net Windows
Update (although I am halfway through a solution for that).
Has anyone determined how to resolve this?

Wesley Vogel said:
I can see that SVCHOST.EXE that hosts RPSCC.DLL can cause a memory leak on
Windows 2003 servers, but could it affect Windows XP as well? I couldn't
find any information, or a hotfix for this.

Honestly, it beats me.
I presume the Blaster Worm would show up on either Symantec Antivirus or
the Malicious Removal Tool?

I would assume that also.

--
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In
Trond Svendsen said:
I can see that SVCHOST.EXE that hosts RPSCC.DLL can cause a memory leak on
Windows 2003 servers, but could it affect Windows XP as well? I couldn't
find any information, or a hotfix for this.

I presume the Blaster Worm would show up on either Symantec Antivirus or
the Malicious Removal Tool?

Trond

Wesley Vogel said:
Hi Trond,

RpcSS.dll is Distributed COM Services. RpcSS.dll is related to
DcomLaunch (DCOM Server Process Launcher service) and RpcSs (Remote
Procedure Call (RPC) service). Both are neccesary services.

RpcSS.dll is also related to the Blaster worm.

Search the Support Knowledge Base (KB)
Search Product: Windows XP
For: RpcSS.dll
http://support.microsoft.com/search...=1,2,3,4,7,10,12&mode=a&adv=1&spid=1173&range

--
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In Trond Svendsen <[email protected]> hunted and pecked:
Wes,

Yes, I'm on a home network running on wireless. I have two computers
running, and they both connect to inet using a wireless accesspoint. I
also have RDP enabled on both on them.

I've been monitoring the services, and it seems like it's RpcSS.dll that
is slowly but shurely increasing with 4K at a time, until the OS is left
useless.

Best regards
Trond Svendsen

Hi Trond,

I question why you have these services running. Maybe you need them.
Are you on a network? On dialup?

TermService = Terminal Services
Browser = Computer Browser service
FastUserSwitchingCompatibility = Fast User Switching Compatibility
service lanmanserver = Server service
lanmanworkstation = Workstation service
Nla = Network Location Awareness service
RasMan = Remote Access Connection Manager service
seclogon = RunAs Service / Secondary Logon service
ShellHWDetection = Shell Hardware Detection service
TapiSrv = Telephony service
dmserver = Logical Disk Manager service
ERSvc = Error Reporting Service
TrkWks = Distributed Link Tracking Client service
WZCSVC = Wireless Zero Configuration service
LmHosts = TCP/IP NetBIOS Helper service
RemoteRegistry = Remote Registry service
SSDPSRV = SSDP Discovery Service
WebClient = WebClient service

If not on a network, I would disable the following services:

Terminal Services
Disabled, for security measures.
Manual, if using Remote Desktop (Remote Administration), Remote
Assistance, Fast User Switching.
http://smallvoid.com/tweak/winnt/service/stuv.html#TERMSERVICE

Computer Browser service
Automatic, if on a network and there is no dedicated master browser.
Disabled, if not browsing Network Neighborhood for shares/printers.
http://smallvoid.com/tweak/winnt/service/abc.html#BROWSER

Fast User Switching Compatibility
Manual, and it will only be activated when a fast user switch is
requested. Otherwise disabled.
http://smallvoid.com/tweak/winnt/service/def.html#FUS

Server service
Automatic, if wanting to share files and printers.
Disabled, if no files to share.
http://smallvoid.com/tweak/winnt/service/stuv.html#SERVER

Workstation service
Automatic, when in a simple home network.
Disabled, if not needing access to network-shares
http://smallvoid.com/tweak/winnt/service/wxyz.html#WORKSTATION

Network Location Awareness
Disabled if not on a network.
http://smallvoid.com/tweak/winnt/service/mno.html#NLA

Remote Access Connection Manager
Disabled, if not using Modem, Virtual Private Networking(VPN) or
Internet
Connection Sharing.
Manual, if wanting the ability to create such connections when
required. http://smallvoid.com/tweak/winnt/service/pqr.html#RASMAN

RunAs Service / Secondary Logon
Disabled, if not needing to start applications under another accounts
credentials.
Manual, if once in awhile need to start an application as another user
(Like Administrator).
Automatic, if constantly starting applications as another user, as it
will avoid slow application launch.
http://smallvoid.com/tweak/winnt/service/pqr.html#SECLOGON

Shell Hardware Detection
Disabled, unless having problems configuring your Autoplay.
http://smallvoid.com/tweak/winnt/service/stuv.html#SHELLHWDETECTION

Telephony
Disabled if not on a dialup modem.
http://smallvoid.com/tweak/winnt/service/stuv.html#TAPISRV

Logical Disk Manager service
Logical Disk Manager Watchdog Service that detects the
appearance/disappearance of hard drives and the partitions they
contains.

Note if this service is stopped, then dynamic disk status and
configuration information might become outdated. Therefore if one is
considering to change this service state to Manual, then make sure that
none of the disks in the system are configured as dynamic disks.
http://smallvoid.com/tweak/winnt/service/jkl.html#DMSERVER

If you have none of the above, Logical Disk Manager service doesn't
need to run.

Error Reporting Service if don't want to give detailed information
about your computer to Microsoft every time an application crashes.
http://smallvoid.com/tweak/winnt/service/def.html#ERSVC

Distributed Link Tracking Client service
Disabled, if on a simple home network.
Automatic, if connected to a domain and uses a NTFS file system.
http://smallvoid.com/tweak/winnt/service/def.html#TRKWKS

Wireless Zero Configuration
Disabled, if not using wireless network with a 802.11 network device.
Automatic, if using wireless netwok AND manufacture of the netcard
haven't provided software of their own.
http://smallvoid.com/tweak/winnt/service/wxyz.html#WZCSVC

TCP/IP NetBIOS Helper service
Disabled, if on a simple home network (Even if using Netbios over
TcpIp).
Automatic, if needing to login on to a domain using Netbios/WINS or
using
the LmHosts-file.
http://smallvoid.com/tweak/winnt/service/stuv.html#LMHOSTS

Remote Registry service
Disabled, for security measures.
http://smallvoid.com/tweak/winnt/service/pqr.html#REMOTEREGISTRY

SSDP Discovery Service
Disabled, unless working with networked Universal Plug and Play devices
or using Internet Connection Sharing.
http://smallvoid.com/tweak/winnt/service/stuv.html#SSDPSRV

WebClient
Disabled.
http://smallvoid.com/tweak/winnt/service/wxyz.html#WEBCLIENT

You can look up recommendations for services here...

http://smallvoid.com/tweak/winnt/services.html

http://www.blackviper.com/WinXP/servicecfg.htm

--
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In Trond Svendsen <[email protected]> hunted and pecked:
Background; while installing WinXP recently, I installed Symantec
Antivirus Corp Edition 10.1.6.6000 /SAV) before installing any network
drivers. Then I started Windows Update, and installed the rest of my
software.
Just now I booted into safe mode, and ran a deep scan using SAV. No
risks,
or viruses found.

I consider myself an experienced user, and I've (re)installed WinXP
many
times, but this is the first time I've experienced this issue.

Here are a list of the SVCHOST.EXE running:

svchost.exe 952 DcomLaunch, TermService
svchost.exe 1020 RpcSs
svchost.exe 1060 AudioSrv, Browser, CryptSvc, Dhcp,
dmserver,
ERSvc, EventSystem,
FastUserSwitchingCompatibility,
helpsvc,
lanmanserver, lanmanworkstation,
Netman,
Nla, RasMan, Schedule, seclogon, SENS,
SharedAccess, ShellHWDetection,
TapiSrv,
Themes, TrkWks, W32Time, winmgmt,
wscsvc, wuauserv, WZCSVC
svchost.exe 1156 Dnscache
svchost.exe 1232 LmHosts, RemoteRegistry, SSDPSRV,
WebClient
Best regards
Trond Svendsen

PID, process identifier, numbers change every time that you boot and
PID numbers are not necessarily the same from one machine to the
next. PIDs can be used with the netstat -ano command, for example,
to see what PID is what process in the Task Manager.

process identifier (PID)
[[A numerical identifier that uniquely distinguishes a process while
it
runs. Use Task Manager to view PIDs.]]

The Network Service account is a special built-in account that has
reduced privileges similar to an authenticated user account. The
actual name of the
account is NT AUTHORITY\NetworkService.

Network Service uses this...
C:\WINDOWS\System32\svchost.exe -k NetworkService
to start svchost.exe to load DnsCache, the DNS Client service, which
is
dnsrslvr.dll.

UPDATE your antivirus software and run a full system scan.

UPDATE whatever anti-spyware applications that you have and run a
full system scan with each one.

You might want to start in Safe Mode to run your antivirus and
anti-spyware
software.

Running a full system antivirus scan or anti-spyware scan in Safe
Mode can be a good idea. Some viruses and other malware like to
conceal themselves in areas Windows protects while using them. Safe
mode can prevent those applications access and therefore unprotect
the viruses or other malware allowing for easier removal.

''In safe mode, you have access to only basic files and drivers
(mouse, monitor, keyboard, mass storage, base video, default system
services), just the minimum device drivers required to start
Windows.''

Because of that some malware does not load in Safe Mode and is easier
to get
rid of.

How to start Windows in Safe Mode Windows XP
http://www.bleepingcomputer.com/forums/index.php?showtutorial=61#winxo

--
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In Trond Svendsen <[email protected]> hunted and pecked:
It's SVCHOST.EXE (PID 1212)
 
Back
Top