Philips CD Driver won't install.

  • Thread starter Thread starter Dave Neve
  • Start date Start date
D

Dave Neve

Hi

I have an old but little used Philips CD Writer (CDRW48A).

I am using a Windows driver because I have an install problem with the
Philips CD but the results are constant hangups.

The Philips install program tells me that......

[IS ph1] Error : Dfw dll is not properly initialised (line 7 from bottom)
[IS ph1] Warning : Setup will exit (line 6 from bottom)

Can anyone help?

Thanks in advance

Complete installation run follows:

=========================================================
====== Log started on Jan 02, 2006 at 09:54:03 ======
=========================================================
[VCSetup] Launched...
[VCSetup] Language retrieved from the OS: French
[VCSetup] RegQueryValueEx: SOFTWARE\Philips\CD-RW\Flowcontrol\Current = 100
[VCSetup] Show Language selection Dbx...
[VCSetup] User selected as setup language: French
[VCSetup] Launched: E:\wizard\setup.exe 1 -l040c
[IS ] ========================================================
[IS ] ====== Log started on Jan 2, 2006 at 09:54:32 ======
[IS ] ========================================================
[IS ] Version (2.1.5)
[IS ph1] Write registry [SOFTWARE\Philips\CD-RW\SetupBusy] : 1
[IS ph1] Write registry [SOFTWARE\Philips\CD-RW\Flowcontrol\current]: 100
[IS ph1] File NeroWnaspi32.dll copied from
C:\DOCUME~1\DAVENE~1\LOCALS~1\Temp\{FC1A2C73-5182-11D4-88D6-00C04F82136B}\
to C:\DOCUME~1\DAVENE
[IS ph1] ~1\LOCALS~1\Temp\
[IS ph1] File dfw.dll copied from
C:\DOCUME~1\DAVENE~1\LOCALS~1\Temp\{FC1A2C73-5182-11D4-88D6-00C04F82136B}\
to C:\WINDOWS\system32\
[IS ph1] File Info <dfw.dll>
[IS ph1] Location : C:\WINDOWS\system32\
[IS ph1] Version : 2.1.5.0
[IS ph1] Date/Time: 2002\08\21; 18:8:6
[IS ph1] Attrib : Normal
[IS ph1] Size : 208 KB (212992 bytes)
[DfwInt ] Init dll actions called.
[DfwInt ] *** Diagnose Frame Work version (2.1.5) ***
[DfwInt ] Operating System: Windows XP Service Pack 2, Build 2600
[DfwInt ] Nero <WNASPI32.DLL> Library loaded v(2.0.1.45).
[DfwInt ] [Init : Device info]
[DfwInt ] Number of Host Adapters found via ASPI = 2
[DfwInt ] Devices Found:
[DfwInt ] Host adapter <0> maxSCSItargets <8>
[DfwInt ] Host adapter <0> id <nvatabus>
[DfwInt ] Error - Device(0,0) SCSICommand <SCSI_INQUIRY> : 4 (SCSI/ATAPI
request completed with error).
[DfwInt ] Error - Device(0,1) SCSICommand <SCSI_INQUIRY> : 4 (SCSI/ATAPI
request completed with error).
[DfwInt ] Dev0: E: PHILIPS CDRW48A P1.4 (dev type: 5, Adapter
type: SCSI)
[DfwInt ] Host adapter <1> maxSCSItargets <8>
[DfwInt ] Host adapter <1> id <>
[DfwInt ] => Device unknown: Not included in devicelist.
[DfwInt ] Error - DLL initialization failed.
[DfwInt ] [Applications currently running - START]
[DfwInt ] [Applications currently running - END]
[DfwInt ] Init dll actions completed.
[IS ph1] File dfw.dll loaded into memory
[IS ph1] Wizard set to the foreground
[IS ph1] Selected language for setup : French
[DfwInt ] Function <DLL_CheckStatus> called.
[DfwInt ] Function <DLL_CheckStatus> completed.
[IS ph1] Error : Dfw dll is not properly initialised
[IS ph1] Warning : Setup will exit
[IS ph1] Write registry [SOFTWARE\Philips\CD-RW\SetupBusy] : 0
[DfwInt ] Exit dll actions called.
[DfwInt ] Nero <WNASPI32.DLL> Library removed from memory.
[DfwInt ] Exit dll actions completed.
[IS ph1] Loaded DLL "C:\WINDOWS\system32\dfw.dll" removed from memory
======================================================
====== Log ended on Jan 2, 2006 at 09:54:35 ======
======================================================
 
Dave, go here and download and install new Firmware Update for your drive
http://www.cdrinfo.com/Sections/Firmware/SingleModel.aspx?DriveId=1262


Dave Neve said:
Hi

I have an old but little used Philips CD Writer (CDRW48A).

I am using a Windows driver because I have an install problem with the
Philips CD but the results are constant hangups.

The Philips install program tells me that......

[IS ph1] Error : Dfw dll is not properly initialised (line 7 from bottom)
[IS ph1] Warning : Setup will exit (line 6 from bottom)

Can anyone help?

Thanks in advance

Complete installation run follows:

=========================================================
====== Log started on Jan 02, 2006 at 09:54:03 ======
=========================================================
[VCSetup] Launched...
[VCSetup] Language retrieved from the OS: French
[VCSetup] RegQueryValueEx: SOFTWARE\Philips\CD-RW\Flowcontrol\Current =
100
[VCSetup] Show Language selection Dbx...
[VCSetup] User selected as setup language: French
[VCSetup] Launched: E:\wizard\setup.exe 1 -l040c
[IS ] ========================================================
[IS ] ====== Log started on Jan 2, 2006 at 09:54:32 ======
[IS ] ========================================================
[IS ] Version (2.1.5)
[IS ph1] Write registry [SOFTWARE\Philips\CD-RW\SetupBusy] : 1
[IS ph1] Write registry [SOFTWARE\Philips\CD-RW\Flowcontrol\current]: 100
[IS ph1] File NeroWnaspi32.dll copied from
C:\DOCUME~1\DAVENE~1\LOCALS~1\Temp\{FC1A2C73-5182-11D4-88D6-00C04F82136B}\
to C:\DOCUME~1\DAVENE
[IS ph1] ~1\LOCALS~1\Temp\
[IS ph1] File dfw.dll copied from
C:\DOCUME~1\DAVENE~1\LOCALS~1\Temp\{FC1A2C73-5182-11D4-88D6-00C04F82136B}\
to C:\WINDOWS\system32\
[IS ph1] File Info <dfw.dll>
[IS ph1] Location : C:\WINDOWS\system32\
[IS ph1] Version : 2.1.5.0
[IS ph1] Date/Time: 2002\08\21; 18:8:6
[IS ph1] Attrib : Normal
[IS ph1] Size : 208 KB (212992 bytes)
[DfwInt ] Init dll actions called.
[DfwInt ] *** Diagnose Frame Work version (2.1.5) ***
[DfwInt ] Operating System: Windows XP Service Pack 2, Build 2600
[DfwInt ] Nero <WNASPI32.DLL> Library loaded v(2.0.1.45).
[DfwInt ] [Init : Device info]
[DfwInt ] Number of Host Adapters found via ASPI = 2
[DfwInt ] Devices Found:
[DfwInt ] Host adapter <0> maxSCSItargets <8>
[DfwInt ] Host adapter <0> id <nvatabus>
[DfwInt ] Error - Device(0,0) SCSICommand <SCSI_INQUIRY> : 4 (SCSI/ATAPI
request completed with error).
[DfwInt ] Error - Device(0,1) SCSICommand <SCSI_INQUIRY> : 4 (SCSI/ATAPI
request completed with error).
[DfwInt ] Dev0: E: PHILIPS CDRW48A P1.4 (dev type: 5, Adapter
type: SCSI)
[DfwInt ] Host adapter <1> maxSCSItargets <8>
[DfwInt ] Host adapter <1> id <>
[DfwInt ] => Device unknown: Not included in devicelist.
[DfwInt ] Error - DLL initialization failed.
[DfwInt ] [Applications currently running - START]
[DfwInt ] [Applications currently running - END]
[DfwInt ] Init dll actions completed.
[IS ph1] File dfw.dll loaded into memory
[IS ph1] Wizard set to the foreground
[IS ph1] Selected language for setup : French
[DfwInt ] Function <DLL_CheckStatus> called.
[DfwInt ] Function <DLL_CheckStatus> completed.
[IS ph1] Error : Dfw dll is not properly initialised
[IS ph1] Warning : Setup will exit
[IS ph1] Write registry [SOFTWARE\Philips\CD-RW\SetupBusy] : 0
[DfwInt ] Exit dll actions called.
[DfwInt ] Nero <WNASPI32.DLL> Library removed from memory.
[DfwInt ] Exit dll actions completed.
[IS ph1] Loaded DLL "C:\WINDOWS\system32\dfw.dll" removed from memory
======================================================
====== Log ended on Jan 2, 2006 at 09:54:35 ======
======================================================
Click to expand...
 
Hi

This is interesting stuff but I seem to be out of luck.

Firstly, I had already upgraded to 1.5 but without success.

However, the installer for your version 1.6 doesn't seem to work on my
computer.

There are no drives listed to flash and the refresh button doesn't seem to
work either.

Any ideas why this might be so?

Thanks in advance

Dave Neve

Rich Barry said:
Dave, go here and download and install new Firmware Update for your
drive

http://www.cdrinfo.com/Sections/Firmware/SingleModel.aspx?DriveId=1262


Dave Neve said:
Hi

I have an old but little used Philips CD Writer (CDRW48A).

I am using a Windows driver because I have an install problem with the
Philips CD but the results are constant hangups.

The Philips install program tells me that......

[IS ph1] Error : Dfw dll is not properly initialised (line 7 from
bottom)
[IS ph1] Warning : Setup will exit (line 6 from bottom)

Can anyone help?

Thanks in advance

Complete installation run follows:

=========================================================
====== Log started on Jan 02, 2006 at 09:54:03 ======
=========================================================
[VCSetup] Launched...
[VCSetup] Language retrieved from the OS: French
[VCSetup] RegQueryValueEx: SOFTWARE\Philips\CD-RW\Flowcontrol\Current =
100
[VCSetup] Show Language selection Dbx...
[VCSetup] User selected as setup language: French
[VCSetup] Launched: E:\wizard\setup.exe 1 -l040c
[IS ] ========================================================
[IS ] ====== Log started on Jan 2, 2006 at 09:54:32 ======
[IS ] ========================================================
[IS ] Version (2.1.5)
[IS ph1] Write registry [SOFTWARE\Philips\CD-RW\SetupBusy] : 1
[IS ph1] Write registry [SOFTWARE\Philips\CD-RW\Flowcontrol\current]:
100
[IS ph1] File NeroWnaspi32.dll copied from
C:\DOCUME~1\DAVENE~1\LOCALS~1\Temp\{FC1A2C73-5182-11D4-88D6-00C04F82136B}\
to C:\DOCUME~1\DAVENE
[IS ph1] ~1\LOCALS~1\Temp\
[IS ph1] File dfw.dll copied from
C:\DOCUME~1\DAVENE~1\LOCALS~1\Temp\{FC1A2C73-5182-11D4-88D6-00C04F82136B}\
to C:\WINDOWS\system32\
[IS ph1] File Info <dfw.dll>
[IS ph1] Location : C:\WINDOWS\system32\
[IS ph1] Version : 2.1.5.0
[IS ph1] Date/Time: 2002\08\21; 18:8:6
[IS ph1] Attrib : Normal
[IS ph1] Size : 208 KB (212992 bytes)
[DfwInt ] Init dll actions called.
[DfwInt ] *** Diagnose Frame Work version (2.1.5) ***
[DfwInt ] Operating System: Windows XP Service Pack 2, Build 2600
[DfwInt ] Nero <WNASPI32.DLL> Library loaded v(2.0.1.45).
[DfwInt ] [Init : Device info]
[DfwInt ] Number of Host Adapters found via ASPI = 2
[DfwInt ] Devices Found:
[DfwInt ] Host adapter <0> maxSCSItargets <8>
[DfwInt ] Host adapter <0> id <nvatabus>
[DfwInt ] Error - Device(0,0) SCSICommand <SCSI_INQUIRY> : 4
(SCSI/ATAPI request completed with error).
[DfwInt ] Error - Device(0,1) SCSICommand <SCSI_INQUIRY> : 4
(SCSI/ATAPI request completed with error).
[DfwInt ] Dev0: E: PHILIPS CDRW48A P1.4 (dev type: 5, Adapter
type: SCSI)
[DfwInt ] Host adapter <1> maxSCSItargets <8>
[DfwInt ] Host adapter <1> id <>
[DfwInt ] => Device unknown: Not included in devicelist.
[DfwInt ] Error - DLL initialization failed.
[DfwInt ] [Applications currently running - START]
[DfwInt ] [Applications currently running - END]
[DfwInt ] Init dll actions completed.
[IS ph1] File dfw.dll loaded into memory
[IS ph1] Wizard set to the foreground
[IS ph1] Selected language for setup : French
[DfwInt ] Function <DLL_CheckStatus> called.
[DfwInt ] Function <DLL_CheckStatus> completed.
[IS ph1] Error : Dfw dll is not properly initialised
[IS ph1] Warning : Setup will exit
[IS ph1] Write registry [SOFTWARE\Philips\CD-RW\SetupBusy] : 0
[DfwInt ] Exit dll actions called.
[DfwInt ] Nero <WNASPI32.DLL> Library removed from memory.
[DfwInt ] Exit dll actions completed.
[IS ph1] Loaded DLL "C:\WINDOWS\system32\dfw.dll" removed from memory
======================================================
====== Log ended on Jan 2, 2006 at 09:54:35 ======
======================================================
Click to expand...
Click to expand...
 
Back
Top