Hey, It happened to me too.Follow these steps.
Uninstall any virtual drive making software such as magicISO,powerISO etc. But if you have Nero, dont bother to uninstall it.
Reboot your computer, go to BIOS and select the option "Load optimal defaults" or "Load setup defaults".
Save changes and exit.
Thats it. All will be OK.
Any comments? mail me to (e-mail address removed)
Pat Garard wrote:
Phantom CD Drive
18-Mar-09
G'Day All
Since installing Vista HP (about 6 months ago), I have had a 'phantom' CD
drive (always Drive Letter E)
I have so far tolerated it - but not knowing what the h&ll it is is
irritating me
The FOXCONN Motherboard has an (unused) CD connector, but FOXCONN don't
believe that that is the problem
Computer has
2 x HDD, SATA connecte
2 x CD/DVD, IDE connecte
External 80 GB USB Hard Drive
Internal USB Multi-Card Reader/USB Por
On boo
C: - SATA HD
D: - SATS HD
E :- unknown CD Drive ?????
F: - IDE CD/DV
G: - IDE CD/DV
H: - 80GB USB External Driv
I: - Multi-Card Reade
K: - Multi-Card Reade
L: - Multi-Card Reade
M: - Multi-Card Reade
N: - Multi-Card Reader (USB Flash Drive on USB Port
Drive E: appears i
My Computer/Windows Explore
Drive E: does NOT APPEAR i
Disk Management (so I cannot change its Drive Letter and letter E is NOT
AVAILABLE), O
Device Manager (in a way that I can identify
Does anyone have an idea what this might be
AND (while I think of it
Is there some prejudice against drive 'J:' (the letter J is available and I
can force its use, but the Card Reader does not 'naturally' use it)
--
Regards
Pat Garar
Melbourne, Australi
_______________________
Previous Posts In This Thread:
Phantom CD Drive
G'Day All
Since installing Vista HP (about 6 months ago), I have had a 'phantom' CD
drive (always Drive Letter E)
I have so far tolerated it - but not knowing what the h&ll it is is
irritating me
The FOXCONN Motherboard has an (unused) CD connector, but FOXCONN don't
believe that that is the problem
Computer has
2 x HDD, SATA connecte
2 x CD/DVD, IDE connecte
External 80 GB USB Hard Drive
Internal USB Multi-Card Reader/USB Por
On boo
C: - SATA HD
D: - SATS HD
E :- unknown CD Drive ?????
F: - IDE CD/DV
G: - IDE CD/DV
H: - 80GB USB External Driv
I: - Multi-Card Reade
K: - Multi-Card Reade
L: - Multi-Card Reade
M: - Multi-Card Reade
N: - Multi-Card Reader (USB Flash Drive on USB Port
Drive E: appears i
My Computer/Windows Explore
Drive E: does NOT APPEAR i
Disk Management (so I cannot change its Drive Letter and letter E is NOT
AVAILABLE), O
Device Manager (in a way that I can identify
Does anyone have an idea what this might be
AND (while I think of it
Is there some prejudice against drive 'J:' (the letter J is available and I
can force its use, but the Card Reader does not 'naturally' use it)
--
Regards
Pat Garar
Melbourne, Australi
_______________________
Maybe its a burning software on you computer which created a virtual drive??
Maybe its a burning software on you computer which created a virtual drive??
Do you have Nero or Roxio on your computer
--
Computer/Software Exper
"And In The End... The Love You Take, Is Equal To The Love You Make"
:
Re: Phantom CD Drive
never seen either of those applications "create a virtual drive"..
--
Asking a question
Please tell us the version of the application you are asking about
your OS, Service Pack leve
and the FULL contents of any error message(s)
RE: Phantom CD Drive
The C. [MS MVP] wrote
Extremely unlikely
Please post a link to your MVP profile
Malk
-
MS-MV
Elephant Boy Computers - Don't Panic
http://www.elephantboycomputers.com/#FAQ
Re: Phantom CD Drive
Pat Garard wrote:
When you installed Vista, did you also install the latest drivers for your
motherboard? Flash the BIOS to the latest version? Install software to
create a virtual disk such as Daemon Tools?
Malke
--
MS-MVP
Elephant Boy Computers - Don't Panic!
http://www.elephantboycomputers.com/#FAQ
motherboard?
motherboard?
YES! FOXCONN provide an auto-update program to do this.
YES! As above
NO!
This occurs during Boot - Drive E has ALWAYS been allocated after C, D (SATA
HDDs)
but before F, G (IDE CD/DVDs).
I am just plain irritated, I guess.
--
Regards,
Pat Garard
Melbourne, Australia
_______________________
Re: Phantom CD Drive
Pat Garard wrote:
Look for an option in your BIOS to disable the extra SATA connections and
see what happens. Other than that, I'm sorry but I don't know. Perhaps
Foxconn's tech support will have an answer for you.
Sorry that I was unable to help you.
Malke
--
MS-MVP
Elephant Boy Computers - Don't Panic!
http://www.elephantboycomputers.com/#FAQ
Are you using a U3 flash drive (smart disk)?
Are you using a U3 flash drive (smart disk)?
unsure it its the case here but ive seen this from pc's & monitors with built
unsure it its the case here but ive seen this from pc's & monitors with
built in smart card readers, or have you got a usb flash drive plugged in,
maybe using as ready boost and the rest as extra file storage?
?
See my original post.
See my original post.
However, at one stage I de-installed its driver and physically removed it -
no change
--
Regards,
Pat Garard
Melbourne, Australia
_______________________
I had a problem with a phantom K: drive.Pat Garard described it perfectly.
I had a problem with a phantom K: drive.
Pat Garard described it perfectly.
The K: drive was not displayed in device manager or disk manager,
although the letter was reserved in disk manager and I could not use it.
Thinking this was a problem with a USB device I uninstalled all these
devices, unplugged everything and restarted the computer. The devices
were all rediscovered, and the K: drive did not go away.
I had none of the DVD playing/recording software or other software
others have reported causing this sort of issue.
I have a EXT2 file system driver, but that was not the reason either.
I think I hit the computer with a hammer exactly twice. The K: drive
did not go away.
I deleted all the entries under HKLM\SYSTEM\MountedDevices and
restarted the system. The K: drive was gone. Afterward I had to re-map
some USB drives but that was all.
Hope this works for you.
Stephen
--
StephenD
Submitted via EggHeadCafe - Software Developer Portal of Choice
Managed Speech API in Windows Vista / .NET 3.0
http://www.eggheadcafe.com/tutorial...1-480b2175b894/managed-speech-api-in-win.aspx