PCI Simple Communications Controller

  • Thread starter Thread starter Graham
  • Start date Start date
G

Graham

G'day all.

This is probably a silly question, but...

When I installed Beta2 x86 my soft modem was recognised. With RC1, both x86
and x64, it is not recognised. I simply get the message saying that I should
check the with the manufacturer for an updated driver. This isn't a big deal
at the moment because I only use it for faxing, but I would like to resolve
the problem.

The reason that I think that this will be a dumb question is that I haven't
seen a single post by anyone with this issue.

So, does anyone know how I get my modem recognised?

It's a Swann internal fax/modem with a Conexant chipset on COM port 3. I
know that there are drivers for Conexant modems in Vista, but I can not get
them to install. I also know that Vista does not see COM3 for some reason,
although I can select it in the device settings under Ports.

Any advice would be appreciated.

Thanks,
Graham.
 
Like I said, it was a stupid question.

I was trying to install it with the wrong modem driver.
 
I have a Zoom modem with the same chipset, I believe. In the 5600 build, it
installed and worked fine. In the 5728 build it installs fine but when I
reboot, I get a blue screen. I tried the drivers Windows wanted to use and
the ones directly from the Zoom site, but neither one worked.

I don't really understand exactly what broke--are the drivers different and
not workable in 5728 or did they change something in Windows which causes
the problem?

Clark
 
Back
Top