PC Doesn't Like To Boot

  • Thread starter Thread starter Buck Turgidson
  • Start date Start date
B

Buck Turgidson

I have a PC with an ECS K7S5A mobo, and an Enermax 430w PSU. When I first
power-up the unit, it hangs after the BIOS check, right before it loads the
OS.

It seems that when it heats up, it will reboot more consistently.

I have reseated the memory and video card.

Should I have the PSU checked? I am running out of ideas for things to try.
 
Buck Turgidson said:
I have a PC with an ECS K7S5A mobo, and an Enermax 430w PSU. When I first
power-up the unit, it hangs after the BIOS check, right before it loads the
OS.

It seems that when it heats up, it will reboot more consistently.

I have reseated the memory and video card.

Should I have the PSU checked? I am running out of ideas for things to
Click to expand...
try.

disconnect the harddrive and CD...
set the bios to boot first from floppy and see if it will boot ok...

if so, you now have the problem at least narrowed down to the HD or CD

sometimes a different combination of drives on the ide cables will make a
difference (though of course, it;s no supposed to)
 
disconnect the harddrive and CD...
set the bios to boot first from floppy and see if it will boot ok...

if so, you now have the problem at least narrowed down to the HD or CD

sometimes a different combination of drives on the ide cables will make a
difference (though of course, it;s no supposed to)
Click to expand...

I have the BIOS set to boot from the floppy, so when I don't have a disk in
there, it doesn't seem like it even reads it after the BIOS check. The
screen just goes blank.

Is there a clue here somewhere? I
 
Have you tried jumpering the onboard 2-pin header to clear the CMOS?

Have you removed all daughtercards except the video card? BIOS on
another daughtercard might clear the screen (which is why it goes blank)
but not be loading correctly. For example, I have an Adaptec SCSI host
controller card which clears the screen and then paints its BIOS version
and devices found. I used to have a Promise Ultra100 card which did not
clear the screen (which results in painting over other prior output) and
in a later BIOS update it would clear the screen. Could be some
daughtercard is hanging after the POST.

Have you tried removing all but one memory stick? And with only one
memory stick, have you tried switching to a different one (if you have
more than one stick)?

Do you even see the BIOS screen at bootup (i.e., does the video card's
BIOS load so it can then show the startup screen, like the BIOS version,
results of drive search in BIOS, etc.)?
 
I have a PC with an ECS K7S5A mobo, and an Enermax 430w PSU. When I first
power-up the unit, it hangs after the BIOS check, right before it loads the
OS.

It seems that when it heats up, it will reboot more consistently.

I have reseated the memory and video card.

Should I have the PSU checked? I am running out of ideas for things to try.
Click to expand...

There is a hardware modification for this board.
Check the FAQS here,

http://tinyurl.com/qcq2

HTH :)



--
Free Windows/PC help,
It's a G not a J in jmx to reply :)
http://www.geocities.com/sheppola/trouble.html
Free songs download,
http://www.soundclick.com/bands/8/nomessiahsmusic.htm
 
Back
Top