Patch deployment.

  • Thread starter Thread starter Pili
  • Start date Start date
P

Pili

I'm deploying the latest MS patches MS04-028 to the
facility using MSIexec instructions, I updated the
administrative installation first and then the client
installation, overall it works ok, but it reboots after
the installation I'm using the switch /q because I want it
to be transparent to the user, I noticed on the
instructions that if you use /qn it will be silent
installation and will force to shutdown (I'm not using
this, but is rebooting), can you help me with the correct
switch?
 
To install this update without the user knowing it and prevent the computer
from rebooting when done, use the /qz switch. Silent mode is enabled by
the /q and norestart is enabled by /z. The /n switch causes the package
to install without backing up files being replaced.

For more details, go to this article:

262841 Command-Line switches for Windows software update packages
http://support.microsoft.com/?id=262841


Mark Wilson [MS]
"This posting is provided "AS IS" with no warranties, and confers no
rights."
--------------------
| Content-Class: urn:content-classes:message
| From: "Pili" <[email protected]>
| Sender: "Pili" <[email protected]>
| Subject: Patch deployment.
| Date: Mon, 4 Oct 2004 05:24:44 -0700
| Lines: 10
| Message-ID: <[email protected]>
| MIME-Version: 1.0
| Content-Type: text/plain;
| charset="iso-8859-1"
| Content-Transfer-Encoding: 7bit
| X-Newsreader: Microsoft CDO for Windows 2000
| X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4910.0300
| Thread-Index: AcSqDSFOU1tRUPAeRmKitmWQE87q7w==
| Newsgroups: microsoft.public.win2000.setup_deployment
| Path: cpmsftngxa06.phx.gbl
| Xref: cpmsftngxa06.phx.gbl microsoft.public.win2000.setup_deployment:11649
| NNTP-Posting-Host: tk2msftngxa12.phx.gbl 10.40.1.164
| X-Tomcat-NG: microsoft.public.win2000.setup_deployment
|
| I'm deploying the latest MS patches MS04-028 to the
| facility using MSIexec instructions, I updated the
| administrative installation first and then the client
| installation, overall it works ok, but it reboots after
| the installation I'm using the switch /q because I want it
| to be transparent to the user, I noticed on the
| instructions that if you use /qn it will be silent
| installation and will force to shutdown (I'm not using
| this, but is rebooting), can you help me with the correct
| switch?
|
 
Back
Top