Partition Magic

  • Thread starter Thread starter steve.uk
  • Start date Start date
S

steve.uk

anyone know if partition magic 8 will partition windows xp ntfs volumes on a
raid 1 configuration? (2 x 120gb hdd's)
 
-----Original Message-----
anyone know if partition magic 8 will partition windows xp ntfs volumes on a
raid 1 configuration? (2 x 120gb hdd's)
Click to expand...
Not me. :)

But I'm interested in the answer since I also have 2x120's
and have been thinking of adding partitions. Have also
been considering using Ghost images as back-ups. Can you
point me to a site that has some info on raid 1?

Bill
 
I have sucessfully used PartitionMagic 8.0 with an Asus MB that had raid, twin 60 gig HDs. However, I had to format them as one hard drive first, using the driver on the MB driver CD (put it on a floppy first for when you are asked for a scsi driver). On Windows XP Pro, using initial install. However, if the raid array is already existing , you should be able to partition it also.----- steve.uk wrote: ----

anyone know if partition magic 8 will partition windows xp ntfs volumes on
raid 1 configuration? (2 x 120gb hdd's)
 
To use PartitionMagic with a SCSI hard disk

To use PartitionMagic with a SCSI hard disk, you must
have a SCSI controller card that supports software
Interrupt 13. Most SCSI controller cards let you enable
software Interrupt 13 support in the BIOS through the
card. If your SCSI controller card does not, contact the
manufacturer to determine if your adapter can support
software Interrupt 13. As a general rule, if FDISK cannot
access the entire SCSI disk, PartitionMagic will be
unable to access it too.

Copyright © 1994-2002 PowerQuest Corporation. All rights
reserved.
 
Back
Top