Paper Size Problem

  • Thread starter Thread starter Rodtnick
  • Start date Start date
R

Rodtnick

I am trying to print a report on a tractor feed dot matrix printer. The
size of the form is like 6" wide and 3.5" tall. My report is that exact
size and I have defined a paper to be that exact size. But when I print
the report (one page) it previews as four pages with the next three
being blank. When I print it, it uses four of my forms.

Any help would be appreciated.

Bruce
 
Bruce,

Your report should be no larger than the form size minus
the minimum margin. Your printer will have a margin
requirement.
When you print it is printing the right hand side of your
report on the second page, the bottom of your report on
the third page and the right side of the bottom on the
fourth page.
Find the minimum margins (from the print driver) and
adjust your report to fit.

HTH

Terry
 
Thanks. That's it!

B
Bruce,

Your report should be no larger than the form size minus
the minimum margin. Your printer will have a margin
requirement.
When you print it is printing the right hand side of your
report on the second page, the bottom of your report on
the third page and the right side of the bottom on the
fourth page.
Find the minimum margins (from the print driver) and
adjust your report to fit.

HTH

Terry
Click to expand...
 
Back
Top