pagefile is corrupted or missing

  • Thread starter Thread starter Ron Dowda
  • Start date Start date
R

Ron Dowda

Unfortunally I got into a big hurry and selected to shut-
down the system while it was booting up. In doing so, I
have lost the page file "pagefile.sys" or the setup in the
win2000 page called "performance options" have changed and
the amount of virtual memory is so low that it does not
allow the system boot up.

It boots up to the point of starting to load the user
settings just after completing the login screen.

Is there some way to restore the pagefile.sys settings?

I've tried the following:

1. reloading win2000 on the hard drive
2. trying a dos bootable floppy
3. building win2000 onto another hard drive and trying to
search for the pagefile.sys so I can edit it, maybe.

I don't want to loose all that I have on the hard drive.

Any suggestions?

Thanks, Ron

cell: 210-378-1204
 
Have you tried pressing F8 when prompted & opted on of the options below?

1. Choosing SAFE MODE
2. choosing Last Known Good Congiguration

Ted
 
Hi Ron,
The pagefile (pagefile.sys) could be corrupted. You may want to try deleting
the pagefile via the Recovery Console; it will be re-created automatically
the next time you boot.

Instructions for deleting the pagefile via Recovery Console:
http://support.microsoft.com/default.aspx?scid=KB;EN-US;255205

--

David Bullock, MCSE, MCSA, A+
Windows NT/2000/2003 Setup Support

This posting is provided "AS IS" with no warranties and confers no rights.
Please reply to the newsgroup so that others may benefit.
 
Back
Top