P4SP-MX

  • Thread starter Thread starter Chuck
  • Start date Start date
tx :)
Click to expand...

Note that the cpusupport web page says BIOS minimum version is 1003
for the Celeron D. If you bought the board some time ago, and have
some other processor type in the board currently, you may need to
flash up the board to at least that revision of BIOS. If you are
just about to buy the motherboard, chances are it will already be
running at least that revision. But it is always possible to get
into a spot, where the new processor won't run, because the BIOS
is too old. In a case like that, you'll need to borrow another
processor long enough to flash up the BIOS to a version recent
enough to support the new processor.

HTH,
Paul
 
I have 2 of those board and both of them had the 1002 bios. Strangely, I
could flash them without any problem using aflash.

But now I have a problem with Accpac Plus (dos version), crash every time I
use it. Cant use it more than 10 min withiut a freeze. Windows always works
fine, but I have to kill the accpac plus window. Weird. Its like the new
processor (Celeron D) isnt compatible with Accpac Plus.

Paul said:
tx :)
Click to expand...

Note that the cpusupport web page says BIOS minimum version is 1003
for the Celeron D. If you bought the board some time ago, and have
some other processor type in the board currently, you may need to
flash up the board to at least that revision of BIOS. If you are
just about to buy the motherboard, chances are it will already be
running at least that revision. But it is always possible to get
into a spot, where the new processor won't run, because the BIOS
is too old. In a case like that, you'll need to borrow another
processor long enough to flash up the BIOS to a version recent
enough to support the new processor.

HTH,
Paul
Click to expand...
Click to expand...
 
Back
Top