P4PE Overclock - bios 1003/4/5/6.. going down-hill?

  • Thread starter Thread starter Immuno
  • Start date Start date
I

Immuno

Is it my imagination or is the max OC achievable on my machine with the more
recent bios upgrades for the P4PE board going down - (because of the bios)?

For the moment I'm choosing to (temporarily) ignore the fact that running
everything modestly overvolted, a P4 2.4B @ 2.7+ and Corsair XMS 333 sticks
at ~400 for months may have taken their toll :o)

Its just that I have a suspicion that in order to accommodate the 800 FSB
P4c's the 533's overclockability may have been sacrificed along the way.

Anyone got an opinion on which of the previous bios' more "OC-helpful".

..... !'m willing to accept that I'm in denial about "abusing" the hardware -
I've just got to get the paranoia taken care of first :o)

Pete


Pete
 
" !'m willing to accept that I'm in denial about "abusing" the hardware -
I've just got to get the paranoia taken care of first :o)">>>>HAHAHA!!

Seriously though, if you aren't running your overvolting over 10 percent of
spec, your HW should never have issues..
 
I have had no problems with any of the Bios 1001-1006. I am running P4
[email protected] at default vcore. I am using Corsair XMS PC3500 and it is running
at 427MHz. It could be your memory holding you back. I have had problems
with Corsair running beyond it's rated speed.
 
Ahhhhhh, you must be the guy with the 200L liquid nitrogen Dewar sitting
out-side their house :o))))))
 
LOLOLOLOL
Nuts.
Immuno said:
Ahhhhhh, you must be the guy with the 200L liquid nitrogen Dewar sitting
out-side their house :o))))))



my
Click to expand...
Ram might Be my Problem

Dennis E Strausser Jr (Raichu!!), don't fear my electric
I won't use it if I feel safe.
 
Back
Top