P4P800 Deluxe and SATA RAID with Windows XP

  • Thread starter Thread starter Jacob Jørgensen
  • Start date Start date
J

Jacob Jørgensen

Hello,

I have a P4P800 Deluxe and 2 baracuda 160GB SATA discs, which I want to use
on the south bridge as RAID 0 and as primary system drive.

I can set the RAID 0 up at power on (CTRL+I), but during the Windows XP
installation the installation dosen't find any harddisks - what are I'm
doing wrong (no harddisk found)?

Regards

Jacob
 
Hello,

I have a P4P800 Deluxe and 2 baracuda 160GB SATA discs, which I want to use
on the south bridge as RAID 0 and as primary system drive.

I can set the RAID 0 up at power on (CTRL+I), but during the Windows XP
installation the installation dosen't find any harddisks - what are I'm
doing wrong (no harddisk found)?

Regards

Jacob

your not hiting F6 to install the raid drivers. DOUG
 
Yes I have hit F6 and installed the VIA driver from the ASUS MB-CD - but
still no succes.

Jacob
 
What if my PC with internet acces is a W2K system - I can't run the
downloaded file on my W2K PC.

Jacob
 
The driver should be on the motherboard CD,just copy it to a floppy. There is
a raid driver and base driver on the CD for the intel SATA controller.,
DOUG
 
Thanks for the help - I've solved the problem - needed to install the Intel
driver (F6).

Jacob
 
Back
Top