P4c800E-Deluxe

  • Thread starter Thread starter Farkin.Bastage
  • Start date Start date
F

Farkin.Bastage

My MB no longer posts after flashing to the latest 1018 official BIOS. All
attempts to revive it have failed. I know I need the SN for the RMA, but I
do not possess the box the MB came in. Is the SN imprinted somewhere on the
board itself?
 
Usually, you can see a note glued onto the printer port; on
the note is the printed serial number of the board.

If you open the case, it is inside, just next to where the back-side shield
shall be.

HTMH
 
My MB no longer posts after flashing to the latest 1018 official BIOS. All
attempts to revive it have failed. I know I need the SN for the RMA, but I
do not possess the box the MB came in. Is the SN imprinted somewhere on
the board itself?
Click to expand...


Hi,

you sure the board needs an RMA? I had a similar error with mine and it
turns out the graphics-card wasn't seated properly!

Did you try to clear CMOS and the regular stuff like that?
 
It actually turned out that the 9800Pro 256 I had shit the bed over night.
Turned it off one night, no video the next day. It's already on it's way
back to ATI.

I appreciate all the responses in regards to my original post.
 
Back
Top