P4C800-ED Not Halt On Errors

  • Thread starter Thread starter Patrick
  • Start date Start date
P

Patrick

Hi-

I just put together a new box with a P4C800-E Deluxe, and on boot, I
couldn't even get into setup. The CPU fan I was using didn't support speed
monitoring, and I had the cover off, so was getting the case intrusion
error. Both (or either) of these errors were enough keep the box form
booting (fatal error).

After taking care of these error, I was able to boot, but I couldn't find
anything in setup to tell the bios not to halt on all errors. Am I missing
something, or is this not an option with this BIOS?

-PJS
 
Patrick,

Every bios I have looked at has had this on the first page in the bios menu
at the bottom.
(IE Asus Bios).
Case intrusion on by default is a PIA.

- Tim
 
Every bios I have looked at has had this on the first page in the bios menu
at the bottom.
(IE Asus Bios).

Yeah, me too. I don't see it anywhere in this BIOS. The only mention of
errors is whether or not to wait for F1 after each error. Neither way makes
a difference. I don't even see an indication of what will halt the boot
(usually there's a Halt On All>, All but...>, None, etc., but I can't see
anything in this BIOS. Maybe I'm staring at and just not seeing it
(wouldn't be the first time).
Case intrusion on by default is a PIA.

Yeah, especially if it's a 'fatal' error. I shouldn't have bothered hooking
up the switch, but the wires were dangling there in front of me, so I
figured, what the hell.
 
Back
Top