R
RedRider134
Are there different revision numbers for this board?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
R
Rich Elgin
Yes. As far as I know there is a 1.2 and a 2.0
Never found out what the difference if any is.
Rich
Never found out what the difference if any is.
Rich
M
MikeSp
How is it possible to determine the revision of this board--I tried Adia32,
but it did not (AFAIK) provide the rev.
MikeSp
but it did not (AFAIK) provide the rev.
MikeSp
F
ftran999
There is a label on the board itself that will tell you to rev#MikeSp said:How is it possible to determine the revision of this board--I tried Adia32,
but it did not (AFAIK) provide the rev.
MikeSp
Q
QZ
Rich Elgin said:Yes. As far as I know there is a 1.2 and a 2.0
Never found out what the difference if any is.
Has rev. 2.0 been out for a long enough time, that a vendor with good
product turnover would have only rev. 2.0?
If not, would the vendor know what revision they have? Does the distributor
tell them? Is it on the box? Or would they have to look at the board?
M
MikeSp
Unless it is in code, it is not on the box--I just looked at the box that my
P4C800-E came in and I obtained it two months ago.
MikeSp
--------------------------
P4C800-E came in and I obtained it two months ago.
MikeSp
--------------------------
L
LeeBos
Got my 2.0 in mid Nov. 2003 so I would say unless it's a very low volume dealer
they should all have rev 2's by now.
they should all have rev 2's by now.