P4C800-E in Antec SX1040BII Case

  • Thread starter Thread starter Peter
  • Start date Start date
P

Peter

Are there any known problems putting a P4C800-E board in an Antec
SX1040BII case? Do all of the connectors on the back of the board line up
with openings on the back of the case? They're both ATX so everything
*should* be fine but just checking.
 
Peter said:
Are there any known problems putting a P4C800-E board in an Antec
SX1040BII case?
Click to expand...

I use a Antec Sonata with a P4C800-E no problems.
Do all of the connectors on the back of the board line up
with openings on the back of the case?
Click to expand...

Uhmm, NO, this is why you get a NEW backplate in the box with your
Motherboard,
to make sure they DO line up, as each board is different
 
I had a very easy time building my system with the same motherboard and
case you're considering. The only difficulty I had was trying to match
the case's instruction sheet's descriptions of the USB connectors with
ASUS's description of the pins they should correspond with. That took
several frustrating interpretations and trials by error until I finally
got it right. But from a manufacturing precision standpoint, i.e.,
everything lining up properly, I could not have asked for better. Go for
it!

Herb
 
Back
Top