P4C800-E Dlx Creating Mirror to existing data disks

  • Thread starter Thread starter abc
  • Start date Start date
A

abc

Hi

Just purhaced second harddisk in mind of creating mirror to Intel 875
SATA cotroller. Now before starting to do that , like to verify some
things

Has anyone done this ?
Does orginal data stay in first/original disk (IMPORTANT)
Do i need to take 100% full backup copy of original disk so actually
need one more ....
or how this will work

So goal is just mirror old disk with new one.
And both disks are same kind and model and size.


(e-mail address removed) - tired to spams, so false email and name
 
I am doing this on mine, you will need to do a clean install of XP, make
sure you create the driver disk first there is a makedisk utility on the CD.

You will need create the RAID array, the intructions are in the manual.

John
 
Yes it can be done with the proper direction. Follow this link
http://www.techsupportforum.com/showthread.php?t=9888 to a great forum on
ASUS MB's.
You should always do a full backup before you start a project like this.
In my case I went from a single HD on the Promise chip loaded with WIN/XP
SP2 to a RAID 1 on the Intel ICH5R chip on the same ASUS P4C800E-Dlx using
the original HD plus one new one and NOT having to reload the original
drive. I used Maxtor 120GB ATA drives with ATA to SATA adapters and it still
worked.
Use Clintfan's plan for the configuration your in now and take it step by
step.
Good Luck,
Rich
 
Yes, yes, and yes. Always take backups prior to a process such as this. Do
not rely on RAID 1 as your backup. Raid 1 is not a backup system, it is only
protection against drive failure. IE you will need a backup system
regardless....

I have not read the article referred to above....

I suggest going to the Intel web site and looking in the downloads section
for documentation on the ICH5R. There you will find a document that defines
what RAID Ready is and that states that non RAID to RAID 1 conversion can be
done at run time.

I would check system BIOS version and make sure you have the latest drivers
and IAA Raid edition software at hand before starting. Check BIOS notes and
RAID driver notes at the same time.

I was too chicken to do the Intel method as no one had stated they had done
it without hitches. The documentation also does not instill confidence. (The
method I am referring to here is the online RAID 1 volume creation that can
supposedly be done while Windows is running). So I took the cautious
approach: a drive image and did the process manually. Don't forget to image
restore *all* your partititions on your disc drive, not just your boot
partition. To get the SATA RAID drivers installed, you will need to do a
repair XP (I assume you have XP?) install and feed in the drivers to an F6
prompt. This is after changing the bios to RAID.

- Tim
 
Back
Top