P4C800-E Deluxe RAM options

  • Thread starter Thread starter BobMarley
  • Start date Start date
B

BobMarley

Was considering buying the KVR400X64C3AK2/512 for this board.
anyone having any problems with it?
 
Other than the fact your getting a 512MB kit, and I got the 1G kit, pretty
much same part #'s

Works good, and using the bios overclock utility (not setting timings
manually) your going to top out at about 420Mhz DDR, (+5%) anything over
than speed and it'll drop out of Dual Channel mode.

If your looking to OC, these modules are meant for DDR400 with a little (not
a lot) of room for overhead, for 99% of use, or if you dont intend to
overclock, they are more than good enough, and the benefit (many people on
this group neglect this point) of buying your modules AS A KIT, is that
Kingston at least, if EITHER stick fails, will replace BOTH dimm's at once
for a new set.
 
i'm not overclocking... so i should be ok then.


Other than the fact your getting a 512MB kit, and I got the 1G kit, pretty
much same part #'s

Works good, and using the bios overclock utility (not setting timings
manually) your going to top out at about 420Mhz DDR, (+5%) anything over
than speed and it'll drop out of Dual Channel mode.

If your looking to OC, these modules are meant for DDR400 with a little (not
a lot) of room for overhead, for 99% of use, or if you dont intend to
overclock, they are more than good enough, and the benefit (many people on
this group neglect this point) of buying your modules AS A KIT, is that
Kingston at least, if EITHER stick fails, will replace BOTH dimm's at once
for a new set.
Click to expand...
 
Back
Top