P4C800-E deluxe - monitor more than one chs. fan speed?

  • Thread starter Thread starter kgs
  • Start date Start date
K

kgs

I have only one 3-pin fan connector on my current cusl2-c. But I have a
2-wire fan currently which does not connect to the mobo, so it does not give
me a speed, but I assume that a 3-wire fan supplies both the power and
rotational speed directly on the mobo, so I'd just need a 3-wire fan.

Is it possible on P4C800-e deluxe to monitor the speed of two chs fans, one
for out at the back, and another in at the front.

Any comments on pressures or cfm for using two. Without knowing if it
possible to monitor two fans, or what cfm possiblities exist, I'll probably
just connect my only current fan to the front, or back, and the newly
discoverd speed monitored fan to the other. Either way, I'll use a stocking
to filter the dust from the front.
 
and what about actually being able to turn fan(s) on and off, or change its'
speed. Is this an option of the optional fan itself, and/or the mobo. Or
just same 3-wire type fan.
 
Back
Top