P4C800-E Deluxe Manual FSB setting. Can't do it.

  • Thread starter Thread starter Jack Markham
  • Start date Start date
J

Jack Markham

I must be missing something. I have been working with this MB for a
month and I just can not figure out how to 1. set the FSB in manual mode
and 2. change the FSB:DDR ratio.

When I set the AI Overclock Tuner to Manual, the CPU External Frequency
shows up as 200 and I can not change it.

If I set AI 10 percent overclock, the FSB:DDR ration goes from 1:1 to
3:2 and my memory slows way down.

WTF? Over.


Intel P4, 3.2 GHz
1 gig (2x512) Mushkin 3500 level II
 
Jack Markham said:
I must be missing something. I have been working with this MB for a
month and I just can not figure out how to 1. set the FSB in manual mode
and 2. change the FSB:DDR ratio.

When I set the AI Overclock Tuner to Manual, the CPU External Frequency
shows up as 200 and I can not change it.

If I set AI 10 percent overclock, the FSB:DDR ration goes from 1:1 to
3:2 and my memory slows way down.

WTF? Over.


Intel P4, 3.2 GHz
1 gig (2x512) Mushkin 3500 level II
Click to expand...

After you set the overclock to manual and moved to the CPU frequency,
did you use the + and - keys to change the frequency?
 
Jack Markham said:
I must be missing something. I have been working with this MB for a
month and I just can not figure out how to 1. set the FSB in manual mode
and 2. change the FSB:DDR ratio.

When I set the AI Overclock Tuner to Manual, the CPU External Frequency
shows up as 200 and I can not change it.

If I set AI 10 percent overclock, the FSB:DDR ration goes from 1:1 to
3:2 and my memory slows way down.

WTF? Over.


Intel P4, 3.2 GHz
1 gig (2x512) Mushkin 3500 level II
Click to expand...

This had me stumped for a few days as well. To change the FSB frequency,
you need to use the + and - keys on your numeric keypad with the FSB field
selected. You'll then be able to select in 1 MHz steps. Hope this helps.
 
Back
Top