p4c800 deluxe performance mode Auto/Turbo

  • Thread starter Thread starter Norbert Wenkel
  • Start date Start date
N

Norbert Wenkel

what actually does in the performance mode the turbo option do? when using
the turbo option my 3.06 (533 FSB) 400 MHz Ram (running in dual channel @333
MHz) based system hangs during power on and has to be switched off again to
start in Auto Performance mode.

regards


Norbert
 
I have had the same problem with the same board. Only I am running a 3.2 GHz
with 1 G of 400 Mhz Ram. I believe that you can not utilize the Turbo
function with the PAT function running which is enabled as long as you are
not over clocking.
My two cents worth
 
Norbert Wenkel said:
what actually does in the performance mode the turbo option do? when using
the turbo option my 3.06 (533 FSB) 400 MHz Ram (running in dual channel @333
MHz) based system hangs during power on and has to be switched off again to
start in Auto Performance mode.
Click to expand...

It attempts to use the lowest possible ram timings, which for most people
ends up in a failed boot.
 
Back
Top