P2B with celeron 700?

  • Thread starter Thread starter tolman
  • Start date Start date
T

tolman

I have ASUS P2B rev.1.04. Will it work with cleron 700 (voltage?) ? If yes
then which slot adapter do i need : PGA or FC-PGA. And should this adapter
has voltage regulator??
sorry for my english
 
tolman said:
I have ASUS P2B rev.1.04. Will it work with cleron 700 (voltage?) ? If yes
then which slot adapter do i need : PGA or FC-PGA. And should this adapter
has voltage regulator??
sorry for my english
Click to expand...

Celeron 700 is a Coppermine processor and nominally requires 1.6v-1.75v
(varies with stepping), however it's quite safe to run these processors
on 1.8v, which is the minimum your rev 1.04 board can supply.

You need an FC-PGA adapter with voltage jumpers set to 1.8v. The Slot-T
from Upgradeware will work.

You could also use a Powerleap PL-iP3/T adapter with onboard voltage
regulator if you prefer to spend extra to run your Celeron at the
'proper' voltage, or if you want the option of upgrading to a Tualatin
Celeron later.
 
Back
Top