P2B rev. 1.0 questions

  • Thread starter Thread starter Jadranko Albert
  • Start date Start date
J

Jadranko Albert

I have few questions about ASUS P2B rev. 1.0 motherboard:

1. Does it support PC133 SDRAM memory?
2. What is the maximum memory installable limit?
3. Is there a possibility of chipset's north bridge overheating (chip
doesn't have a cooler)?
4. What is the maximum CPU speed supported?

Also, few overclocking questions:

Are there any problems overclocking Celeron 300A at 450 MHz on P2B and do I
need some special cooler or the standard Titan Slot1 cooler is good enough?
Thx!

Greetings, Jadranko Albert
www.prevrat.net
 
Jadranko said:
I have few questions about ASUS P2B rev. 1.0 motherboard:

1. Does it support PC133 SDRAM memory?
Click to expand...

Yes, but it must be the correct BX-compatible DIMMs

http://homepage.hispeed.ch/rscheidegger/ram_bx_faq.html
2. What is the maximum memory installable limit?
Click to expand...

3 x 256MB, 768MB
3. Is there a possibility of chipset's north bridge overheating (chip
doesn't have a cooler)?
Click to expand...

Doesn't seem to be a problem, but I usually add a thin layer of thermal
compound between the northbridge and it's heatsink.
4. What is the maximum CPU speed supported?
http://homepage.hispeed.ch/rscheidegger/p2b_procupgrade_faq.html

Also, few overclocking questions:

Are there any problems overclocking Celeron 300A at 450 MHz on P2B and do I
need some special cooler or the standard Titan Slot1 cooler is good enough?
Click to expand...

I ran a pair of Slot-1 300As @ 464 on a P2B-DS with the standard retail
coolers for years. Worked perfectly.
 
Back
Top