P2B-LS memory

  • Thread starter Thread starter Michael Taylor
  • Start date Start date
M

Michael Taylor

I have a P2B-LS board and want to add more PC-100 SD-RAM to it. The
motherboard manual indicates it can accept up to 128Mb DIMMS in each
of the 4 DIMM sockets.

The board is rev 1.02 and is using the 1014 firmware. Is it possible
to use larger DIMMS to get more than 512Mb in total?
 
Michael said:
I have a P2B-LS board and want to add more PC-100 SD-RAM to it. The
motherboard manual indicates it can accept up to 128Mb DIMMS in each
of the 4 DIMM sockets.

The board is rev 1.02 and is using the 1014 firmware. Is it possible
to use larger DIMMS to get more than 512Mb in total?
Click to expand...

Maximum RAM on a P2B-LS is 1GB using 4 x 256MB DIMMS, but they *must*
have the correct internal organisation.

Go to crucial.com to order guaranteed compatible DIMMS, and/or read the
FAQ to learn why it can be difficult to determine whether DIMMS from
other sources are compatible:

http://homepage.hispeed.ch/rscheidegger/ram_bx_faq.html

HTH

P2B
 
Michael said:
I have a P2B-LS board and want to add more PC-100 SD-RAM to it. The
motherboard manual indicates it can accept up to 128Mb DIMMS in each
of the 4 DIMM sockets.

The board is rev 1.02 and is using the 1014 firmware. Is it possible
to use larger DIMMS to get more than 512Mb in total?
Click to expand...

You should be able to use some 256 MB DIMMS but they have to be the
proper type. To make sure go to crucial.com and enter your motherboard
there.
 
Back
Top