G
George W. Barrowcliff
My IBM T30 Laptop has a device showing up in the device manager that it
cannot find a device driver for. Computer seems to run OK but I would like
to locate a driver to prevent the 'discovered new hardware' when booting.
(Yes, I know I can disable the device)
Running PCI32.exe reports the following information about the device. It
matches what is reported by the device manager for interrupts, memory usage
and bus information.
Any help would be appreciated.
Thanks, GWB
Bus 0 (PCI), Device Number 31, Device Function 3
Vendor 8086h Intel Corporation
Device 2483h 82801CA SMBus Controller (ICH3-S B1 step)
Command 0001h (I/O Access)
Status 0280h (Supports Back-To-Back Trans., Medium Timing)
Revision 02h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type SMBus Controller
Subsystem ID 02201014h Unknown
Subsystem Vendor 1014h IBM
Address 4 is an I/O Port : 00001880h
System IRQ 11, INT# B
cannot find a device driver for. Computer seems to run OK but I would like
to locate a driver to prevent the 'discovered new hardware' when booting.
(Yes, I know I can disable the device)
Running PCI32.exe reports the following information about the device. It
matches what is reported by the device manager for interrupts, memory usage
and bus information.
Any help would be appreciated.
Thanks, GWB
Bus 0 (PCI), Device Number 31, Device Function 3
Vendor 8086h Intel Corporation
Device 2483h 82801CA SMBus Controller (ICH3-S B1 step)
Command 0001h (I/O Access)
Status 0280h (Supports Back-To-Back Trans., Medium Timing)
Revision 02h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type SMBus Controller
Subsystem ID 02201014h Unknown
Subsystem Vendor 1014h IBM
Address 4 is an I/O Port : 00001880h
System IRQ 11, INT# B