D
DPM
I'm trying to load the XP2 SP2 OPK on a board with a Intel PRO/1000 NIC, and
it's not installing the network. I put an edited WINBOM.ini on a flash
drive and supplied appropriate drivers from the MB CD, but "factory -minint"
still fails to install the network.
First, is this the right forum to ask OPK questions?
If it is, does anyone have any advice on loading network drivers under the
OPK? I need to deploy a OS image from a networked server, so I need to have
a bootable environment that supports networking.
Any advice appreciated.
--
Regards,
Dean
Here's my custom WINBOM:
[Factory]
WinBOMType=WinPE
Reseal=No
[WinPE]
Restart=No
[PnPDriverUpdate]
[PnPDrivers]
[NetCards]
NICPnPID = \I386\inf\e1e5132.inf
[UpdateInis]
[FactoryRunOnce]
[Branding]
[AppPreInstall]
it's not installing the network. I put an edited WINBOM.ini on a flash
drive and supplied appropriate drivers from the MB CD, but "factory -minint"
still fails to install the network.
First, is this the right forum to ask OPK questions?
If it is, does anyone have any advice on loading network drivers under the
OPK? I need to deploy a OS image from a networked server, so I need to have
a bootable environment that supports networking.
Any advice appreciated.
--
Regards,
Dean
Here's my custom WINBOM:
[Factory]
WinBOMType=WinPE
Reseal=No
[WinPE]
Restart=No
[PnPDriverUpdate]
[PnPDrivers]
[NetCards]
NICPnPID = \I386\inf\e1e5132.inf
[UpdateInis]
[FactoryRunOnce]
[Branding]
[AppPreInstall]