G
Guest
I bought a sigvature edition of Windows Vista ultimate upgrade. Funny, I dont
know how to open the package. Please help.
know how to open the package. Please help.
G
GB
See the 10:37 am post - You're not alone 
- GB
- GB
D
Dustin Harper
Take off the tape seal and then pull the red tab at the top of the box
towards you.
Dustin Harper
(e-mail address removed)
http://www.vistarip.com
towards you.
Dustin Harper
(e-mail address removed)
http://www.vistarip.com
G
Guest
I had the same trouble. I removed the red tape with an arrow going from the
front-right of the box around to the back. Then I used a knife to cut
through the tape at the top of the box. Finally, I used the red pull tab on
the top-left of the box to coerce the box open. The contents flip out
(hinged at the bottom-right) in another container. It's not the easiest to
open the first time, but it is easier to re-open later.
Good luck.
front-right of the box around to the back. Then I used a knife to cut
through the tape at the top of the box. Finally, I used the red pull tab on
the top-left of the box to coerce the box open. The contents flip out
(hinged at the bottom-right) in another container. It's not the easiest to
open the first time, but it is easier to re-open later.
Good luck.
G
Guest
Hhaahha, took me a while too, once you slide it out of the sleeve, you gotta
find the 2 seems on either edge of hte Certificate of Authenticity... then
pull the red tab down... you gotta cut the 2 seems iwth a razor, else you
damage the COA.
find the 2 seems on either edge of hte Certificate of Authenticity... then
pull the red tab down... you gotta cut the 2 seems iwth a razor, else you
damage the COA.
G
Guest
Dont feel bad i ended up destroying the plastic box but not the codes thank
god.
god.