Open Gl problems with Wolfenstein's Return of the Castle

  • Thread starter Thread starter Robbiee
  • Start date Start date
R

Robbiee

HELP....
Have an Armada P3 850 with 256ram and an ATI Rage
Mobility video card. After installing game it errors out
to "Could not Open Gl Subsys....
Tried HP/Compaq and also ATI but no help their regarding
drivers.
Anyone have this problem....can't seem to find a solution.
Thanks...
 
Have seen this a few times, if it is happening after you
have tried re-installing, and its not an install
problem. Then it could indicate a problem with your
hardware or software have you had RTCW working and if so
have you updated drivers or hardware recently?

Going by your system specs I would also say you could be
stretching your comp to the limit !

I would test your hardware and software and check that
all is well and other games are playing. Could just be
an install problem but if it turns out to be serious it
might well be impossible to track down the fault though
perhaps others here might help you out.
 
I have the same problem with the same game.. I have an nividia card,
a homebuilt computer, and the latest Nvidia drivers installed
(45.23).. I get the same error with Open GL & RTCW, and I cannot seem
to find a way to get it sorted.

I wish it gave you the option to use D3D, then you could get around
the problem.

My .02 cents

JM
 
I too ran across this same issue with RTCW and an ATI
card. What I did to resolve it was to download and
install the ATI control panel software, problem went away.
 
Back
Top