omega drivers

  • Thread starter Thread starter Jeff McNulty
  • Start date Start date
J

Jeff McNulty

just installed omega drivers from omegadriver.net and cannot get radlinker
to lock in overclocking settings. I have enable clock settings checked and
can adjust the clock speed but the apply button is greyed out. BTW I have a
ati 9600xt. I uninstalled the cat 4.8 drivers and ran nasty file remover.
The omega drivers gave me a 300 point decrease on 3d mark 2003 than the cat
4.8
 
Jeff McNulty said:
just installed omega drivers from omegadriver.net and cannot get radlinker
to lock in overclocking settings. I have enable clock settings checked and
can adjust the clock speed but the apply button is greyed out.
Click to expand...

You need to click on the "Set" button, then the "Apply". You may
also want to set the startup speed ( again after you have clicked the
"Set" button, but before the "Apply" button.)
/Ken


BTW I have a
ati 9600xt. I uninstalled the cat 4.8 drivers and ran nasty file remover.
The omega drivers gave me a 300 point decrease on 3d mark 2003 than the cat
4.8
Click to expand...
AFAIK, the 4.8 based Omega drivers aren't out yet.

Luck;
Ken
 
Jeff McNulty said:
just installed omega drivers from omegadriver.net and cannot get radlinker
to lock in overclocking settings. I have enable clock settings checked and
can adjust the clock speed but the apply button is greyed out. BTW I have a
ati 9600xt. I uninstalled the cat 4.8 drivers and ran nasty file remover.
The omega drivers gave me a 300 point decrease on 3d mark 2003 than the cat
4.8
Click to expand...

When you click on the "Set" button, a pop-up should
appear that says it is successfully clocked at ...; do you
see this pop-up?

Make sure you have any "pop-up" and or registry
change, blocking software disabled/ turned off.

Luck;
Ken
 
Jeff McNulty said:
just installed omega drivers from omegadriver.net and cannot get radlinker
to lock in overclocking settings.
Click to expand...

Well I'm wondering why Radlinker-shortcuts don't have any kind
of effect in games I set them for. For example, no anti-aliasing even
if I enable it for both DirectX and OpenGL from the shortcut
properties and AA is set to "Application preference" from the
drivers 3D-settings. It keeps my clock settings, tough.
 
When you click on the "Set" button, a pop-up should
appear that says it is successfully clocked at ...; do you
see this pop-up?

Make sure you have any "pop-up" and or registry
change, blocking software disabled/ turned off.

Luck;
Ken
Click to expand...
omega driver download 4.4 version.
http://www.mytweakers.net/meuktracker/5905

i think whit the 4.4 everything is sharper vs other version it's been said here and i think it
true... a will be back to that version soon to see.
 
I enabled clock settings moved the sliders clicked set dialog box came up
saying that it over clocked but the apply box is greyed out. So I clicked
OK, at next boot it is back to default settings. I can get ati's overdrive
to clock at 526mhz. I have also tried radlinker with overdrive enabled and
disabled.
 
jeff said:
I enabled clock settings moved the sliders clicked set dialog box came up
saying that it over clocked but the apply box is greyed out. So I clicked
OK, at next boot it is back to default settings. I can get ati's overdrive
to clock at 526mhz. I have also tried radlinker with overdrive enabled and
disabled.
Click to expand...

Did you press "Use Current"-button after set-button ? Otherwise settings
don't stay after reboot.
 
Matti Wartiainen said:
Did you press "Use Current"-button after set-button ? Otherwise settings
don't stay after reboot.
--
Click to expand...

Part of my first response to the OP:

"You need to click on the "Set" button, then the "Apply". You may
also want to set the startup speed ( again after you have clicked the
"Set" button, but before the "Apply" button.)
/Ken"

I think you may have said it better.

Luck;
Ken
 
Back
Top