V
Vangellis
For those of you who have USB scanners that Vista has reported to be
incompatible, do the following.
1- Make sure you have your scanner installation CD
2- Unplug the USB lead from the scanner to the computer.
3- Restart Vista
4- Plug in the USB cable for the scanner to your computer.
5- Vista will state "new hardware found, searching for drivers" let this
finish, you will then be prompted for your driver software disc
6- Insert CD and click on next, Vista will install your scanner and it will
work fine in the Vista Camera and scanner wizard.
7- Please note, if your scanner came with software such as "panel" etc, this
will not work. However, at least you can use your so called obsolete
scanner.
Vangellis
MCP,MCTS,MCPD,MCIPT,MCA,MCSE,MCSD,MCDBA
incompatible, do the following.
1- Make sure you have your scanner installation CD
2- Unplug the USB lead from the scanner to the computer.
3- Restart Vista
4- Plug in the USB cable for the scanner to your computer.
5- Vista will state "new hardware found, searching for drivers" let this
finish, you will then be prompted for your driver software disc
6- Insert CD and click on next, Vista will install your scanner and it will
work fine in the Vista Camera and scanner wizard.
7- Please note, if your scanner came with software such as "panel" etc, this
will not work. However, at least you can use your so called obsolete
scanner.
Vangellis
MCP,MCTS,MCPD,MCIPT,MCA,MCSE,MCSD,MCDBA