Ok I am baffled

[bdeditch]

I have tried many times and many ways to update my internet explorer it
is
version 6.0.2600.0000IS
Product ID: 52783-010-7215742-14714
Update version: Q321232; Q324929
This is a customized version of internet explorer

I went to PCpitstop and it said the version also had telus.net which
was a DSL provider in Canada

The update will go and then get to about 95% and then a little box
shows up saying the " Setup was unable to install all the components,
please close....................... ( you know the rest)

What do I do to get a freesh installon IE 6 , I am running windows ME

 

[Jan Il]

Hi bdeditch

You don't mention the version of Windows you are using, which really is a
must when asking for help in the newsgroups, nor what the problem is that
you feel you need to reintsall IE. Perhaps if you tell us what the problem
is we can help. A repair may not be the answer to the problem.

NOTE FOR SP2: If you have SP2 installed you will first have to uninstall
it before doing the Repair:

Download the utility file at the link below, then double click on it to run
it and it will automatically reset the "IsInstalled" value to 0 (zero) for
you. Then try the install again.
http://www.kellys-korner-xp.com/xp_tweaks.htm (line 114, right)

After the successful reinstall by any of the above methods, go immediately
to the Windows Update website and let it scan your computer for any
necessary updates.

If you are not able to access the Internet, follow the instructions to reset
the Registry below. Be sure to backup the Registry first.

Step-by-step instructions for a manual fix: If you have SP2, uninstall it
before doing the following:

First, go to Start>Run>type in regedit and hit enter
Click on File on the toolbar and click Export to back up your Registry.
Make sure you make a not of where it is saved in case you need to restore
it.

To reset the IsInstalled value to 0 (zero):

Go to [HKEY_LOCAL_MACHINE>SOFTWARE>Microsoft>Active Setup>Installed
Components>scroll down to {89820200-ECBD-11cf-8B85-00AA005B4383}]

Here are the "How to" steps to reset the value:

When you have clicked on the above {...} file, scroll down to "IsInstalled"
in the right side panel and double click on it. A dialog box will open with
a window that has a 1 in it. To replace the 1, just type 0 (zero) to
replace the 1, click OK and close.
Then try the install again.

As soon as you have a successful install, go immediately to the Windows
Update and let it scan and install all the necessary updates before you do
any browsing.


Hope this helps.

Jan
MS MVP - Windows IE/OE [DTS/AumHa]
Smiles are meant to be shared,
that's why they're so contagious.

Replies are posted only to the newsgroup for the benefit or other readers.
How to make a good newsgroup post:
http://www.dts-l.org/goodpost.htm

 

[Guest]

I get this same error, I have tried the Reg edits to set the IsInstalled to
0, and rebooted, displays message, IE is uninstalled, Remove personal
settings, I say "Yes" and reboot again. I still cannot reinstall IE, and
even when I try to browse with IE it will not display any pages. It will not
even show any network activity. Firefox browses fine though. How do I
reinstall IE 6 on a WinXP SP2 system?

I even tried totally deleting IE and Reg entries and it still will not
install stating that
"Setup was unable to install all the components, please close..."
What do you do, when it won't work? I think I am about to restart from
scratch, but I was hoping that there would be a fix from here first.

Hi bdeditch

You don't mention the version of Windows you are using, which really is a
must when asking for help in the newsgroups, nor what the problem is that
you feel you need to reintsall IE. Perhaps if you tell us what the problem
is we can help. A repair may not be the answer to the problem.

NOTE FOR SP2: If you have SP2 installed you will first have to uninstall
it before doing the Repair:

Download the utility file at the link below, then double click on it to run
it and it will automatically reset the "IsInstalled" value to 0 (zero) for
you. Then try the install again.
http://www.kellys-korner-xp.com/xp_tweaks.htm (line 114, right)

After the successful reinstall by any of the above methods, go immediately
to the Windows Update website and let it scan your computer for any
necessary updates.

If you are not able to access the Internet, follow the instructions to reset
the Registry below. Be sure to backup the Registry first.

Step-by-step instructions for a manual fix: If you have SP2, uninstall it
before doing the following:

First, go to Start>Run>type in regedit and hit enter
Click on File on the toolbar and click Export to back up your Registry.
Make sure you make a not of where it is saved in case you need to restore
it.

To reset the IsInstalled value to 0 (zero):

Go to [HKEY_LOCAL_MACHINE>SOFTWARE>Microsoft>Active Setup>Installed
Components>scroll down to {89820200-ECBD-11cf-8B85-00AA005B4383}]

Here are the "How to" steps to reset the value:

When you have clicked on the above {...} file, scroll down to "IsInstalled"
in the right side panel and double click on it. A dialog box will open with
a window that has a 1 in it. To replace the 1, just type 0 (zero) to
replace the 1, click OK and close.
Then try the install again.

As soon as you have a successful install, go immediately to the Windows
Update and let it scan and install all the necessary updates before you do
any browsing.


Hope this helps.

Jan
MS MVP - Windows IE/OE [DTS/AumHa]
Smiles are meant to be shared,
that's why they're so contagious.

Replies are posted only to the newsgroup for the benefit or other readers.
How to make a good newsgroup post:
http://www.dts-l.org/goodpost.htm

I have tried many times and many ways to update my internet explorer it
is
version 6.0.2600.0000IS
Product ID: 52783-010-7215742-14714
Update version: Q321232; Q324929
This is a customized version of internet explorer

I went to PCpitstop and it said the version also had telus.net which
was a DSL provider in Canada

The update will go and then get to about 95% and then a little box
shows up saying the " Setup was unable to install all the components,
please close....................... ( you know the rest)

What do I do to get a freesh installon IE 6 , I am running windows ME

 

[Jan Il]

Hi Skada

I get this same error, I have tried the Reg edits to set the IsInstalled to
0, and rebooted, displays message, IE is uninstalled, Remove personal
settings, I say "Yes" and reboot again. I still cannot reinstall IE, and
even when I try to browse with IE it will not display any pages. It will
not
even show any network activity. Firefox browses fine though. How do I
reinstall IE 6 on a WinXP SP2 system?

I even tried totally deleting IE and Reg entries and it still will not
install stating that
"Setup was unable to install all the components, please close..."
What do you do, when it won't work? I think I am about to restart from
scratch, but I was hoping that there would be a fix from here first.

If you have tried to delete IE and deleted any reg entries, then you have
likely damaged the system. IE is a core part of the Windows XP program, and
unlike IE6 versions of the past, it *can not* be uninstalled without
damaging or disabling the IE and Windows system. The only thing I can
suggest as this point is that you first a scan for any scumware with your
antivirus, and then do a full Repair install. Follow the instructions here:

How to do a repair installation of XP - by Doug Knox
http://www.microsoft.com/windowsxp/using/helpandsupport/learnmore/tips/doug92.mspx

Hope this helps.

Jan
MS MVP - Windows IE/OE [DTS/AumHa]
Smiles are meant to be shared,
that's why they're so contagious.

Replies are posted only to the newsgroup for the benefit or other readers.
How to make a good newsgroup post:
http://www.dts-l.org/goodpost.htm

Hi bdeditch

You don't mention the version of Windows you are using, which really is a
must when asking for help in the newsgroups, nor what the problem is that
you feel you need to reintsall IE. Perhaps if you tell us what the
problem
is we can help. A repair may not be the answer to the problem.

NOTE FOR SP2: If you have SP2 installed you will first have to
uninstall
it before doing the Repair:

Download the utility file at the link below, then double click on it to
run
it and it will automatically reset the "IsInstalled" value to 0 (zero)
for
you. Then try the install again.
http://www.kellys-korner-xp.com/xp_tweaks.htm (line 114, right)

After the successful reinstall by any of the above methods, go
immediately
to the Windows Update website and let it scan your computer for any
necessary updates.

If you are not able to access the Internet, follow the instructions to
reset
the Registry below. Be sure to backup the Registry first.

Step-by-step instructions for a manual fix: If you have SP2, uninstall
it
before doing the following:

First, go to Start>Run>type in regedit and hit enter
Click on File on the toolbar and click Export to back up your Registry.
Make sure you make a not of where it is saved in case you need to restore
it.

To reset the IsInstalled value to 0 (zero):

Go to [HKEY_LOCAL_MACHINE>SOFTWARE>Microsoft>Active Setup>Installed
Components>scroll down to {89820200-ECBD-11cf-8B85-00AA005B4383}]

Here are the "How to" steps to reset the value:

When you have clicked on the above {...} file, scroll down to
"IsInstalled"
in the right side panel and double click on it. A dialog box will open
with
a window that has a 1 in it. To replace the 1, just type 0 (zero) to
replace the 1, click OK and close.
Then try the install again.

As soon as you have a successful install, go immediately to the Windows
Update and let it scan and install all the necessary updates before you
do
any browsing.


Hope this helps.

Jan
MS MVP - Windows IE/OE [DTS/AumHa]
Smiles are meant to be shared,
that's why they're so contagious.

Replies are posted only to the newsgroup for the benefit or other
readers.
How to make a good newsgroup post:
http://www.dts-l.org/goodpost.htm

I have tried many times and many ways to update my internet explorer it
is
version 6.0.2600.0000IS
Product ID: 52783-010-7215742-14714
Update version: Q321232; Q324929
This is a customized version of internet explorer

I went to PCpitstop and it said the version also had telus.net which
was a DSL provider in Canada

The update will go and then get to about 95% and then a little box
shows up saying the " Setup was unable to install all the components,
please close....................... ( you know the rest)

What do I do to get a freesh installon IE 6 , I am running windows ME

 

[Guest]

It may be noteworthy to state that I deleted the Reg Keys as a last resort
and the system boots fine. I think this error stated happening after I
installed the Beta for Defender. I have since uninstalled the program yet
these errors have not gone away. But you may be right, a re-install might be
what will have to happen. Unfortunately, I don't have a Windows CD, I have
an OEM disk that came with the PC (Windows XP Home at that ;(...) I did save
an image of the hard drive, but it was after I noticed the IE errors. I will
have to start over. Fun times by all, I know. I was told that the beta of
Defender/anti-spy tried to rip out IE and MS stated that "it goes to show how
powerful our software is...", but they gave no fix for this.

Hi Skada

I get this same error, I have tried the Reg edits to set the IsInstalled to
0, and rebooted, displays message, IE is uninstalled, Remove personal
settings, I say "Yes" and reboot again. I still cannot reinstall IE, and
even when I try to browse with IE it will not display any pages. It will
not
even show any network activity. Firefox browses fine though. How do I
reinstall IE 6 on a WinXP SP2 system?

I even tried totally deleting IE and Reg entries and it still will not
install stating that
"Setup was unable to install all the components, please close..."
What do you do, when it won't work? I think I am about to restart from
scratch, but I was hoping that there would be a fix from here first.

If you have tried to delete IE and deleted any reg entries, then you have
likely damaged the system. IE is a core part of the Windows XP program, and
unlike IE6 versions of the past, it *can not* be uninstalled without
damaging or disabling the IE and Windows system. The only thing I can
suggest as this point is that you first a scan for any scumware with your
antivirus, and then do a full Repair install. Follow the instructions here:

How to do a repair installation of XP - by Doug Knox
http://www.microsoft.com/windowsxp/using/helpandsupport/learnmore/tips/doug92.mspx

Hope this helps.

Jan
MS MVP - Windows IE/OE [DTS/AumHa]
Smiles are meant to be shared,
that's why they're so contagious.

Replies are posted only to the newsgroup for the benefit or other readers.
How to make a good newsgroup post:
http://www.dts-l.org/goodpost.htm

Hi bdeditch

You don't mention the version of Windows you are using, which really is a
must when asking for help in the newsgroups, nor what the problem is that
you feel you need to reintsall IE. Perhaps if you tell us what the
problem
is we can help. A repair may not be the answer to the problem.

NOTE FOR SP2: If you have SP2 installed you will first have to
uninstall
it before doing the Repair:

Download the utility file at the link below, then double click on it to
run
it and it will automatically reset the "IsInstalled" value to 0 (zero)
for
you. Then try the install again.
http://www.kellys-korner-xp.com/xp_tweaks.htm (line 114, right)

After the successful reinstall by any of the above methods, go
immediately
to the Windows Update website and let it scan your computer for any
necessary updates.

If you are not able to access the Internet, follow the instructions to
reset
the Registry below. Be sure to backup the Registry first.

Step-by-step instructions for a manual fix: If you have SP2, uninstall
it
before doing the following:

First, go to Start>Run>type in regedit and hit enter
Click on File on the toolbar and click Export to back up your Registry.
Make sure you make a not of where it is saved in case you need to restore
it.

To reset the IsInstalled value to 0 (zero):

Go to [HKEY_LOCAL_MACHINE>SOFTWARE>Microsoft>Active Setup>Installed
Components>scroll down to {89820200-ECBD-11cf-8B85-00AA005B4383}]

Here are the "How to" steps to reset the value:

When you have clicked on the above {...} file, scroll down to
"IsInstalled"
in the right side panel and double click on it. A dialog box will open
with
a window that has a 1 in it. To replace the 1, just type 0 (zero) to
replace the 1, click OK and close.
Then try the install again.

As soon as you have a successful install, go immediately to the Windows
Update and let it scan and install all the necessary updates before you
do
any browsing.


Hope this helps.

Jan
MS MVP - Windows IE/OE [DTS/AumHa]
Smiles are meant to be shared,
that's why they're so contagious.

Replies are posted only to the newsgroup for the benefit or other
readers.
How to make a good newsgroup post:
http://www.dts-l.org/goodpost.htm


I have tried many times and many ways to update my internet explorer it
is
version 6.0.2600.0000IS
Product ID: 52783-010-7215742-14714
Update version: Q321232; Q324929
This is a customized version of internet explorer

I went to PCpitstop and it said the version also had telus.net which
was a DSL provider in Canada

The update will go and then get to about 95% and then a little box
shows up saying the " Setup was unable to install all the components,
please close....................... ( you know the rest)

What do I do to get a freesh installon IE 6 , I am running windows ME

 

[Jan Il]

Hi Skada

It may be noteworthy to state that I deleted the Reg Keys as a last resort
and the system boots fine. I think this error stated happening after I
installed the Beta for Defender. I have since uninstalled the program yet
these errors have not gone away. But you may be right, a re-install might
be
what will have to happen. Unfortunately, I don't have a Windows CD, I
have
an OEM disk that came with the PC (Windows XP Home at that ;(...) I did
save
an image of the hard drive, but it was after I noticed the IE errors. I
will
have to start over. Fun times by all, I know. I was told that the beta
of
Defender/anti-spy tried to rip out IE and MS stated that "it goes to show
how
powerful our software is...", but they gave no fix for this.

Yes...a good Rule of Thumb is that you should always remember that "Beta"
means it is still in development, and not a production program, thus, there
are still glitches and problem areas to be resolved. It is best to stick
with production programs. Some Beta's work ok on some machines, but, can
trash others. I know....I'm also an MS beta tester, and after my first beta
adventure I learned not use my main PC for that kind of testing. I have a
separate machine for that. <g>

I also had a problem with the recent WD Beta install, and after a weeks
trying, nothing would fix the problem, thus I had to do a full repair
install as I suggested to fully clear the residual problems. However, some
use the program without issue.

Hope this helps.

Jan
MS MVP - Windows IE/OE [DTS/AumHa]
Smiles are meant to be shared,
that's why they're so contagious.

Replies are posted only to the newsgroup for the benefit or other readers.
How to make a good newsgroup post:
http://www.dts-l.org/goodpost.htm

Hi Skada

I get this same error, I have tried the Reg edits to set the IsInstalled
to
0, and rebooted, displays message, IE is uninstalled, Remove personal
settings, I say "Yes" and reboot again. I still cannot reinstall IE,
and
even when I try to browse with IE it will not display any pages. It
will
not
even show any network activity. Firefox browses fine though. How do I
reinstall IE 6 on a WinXP SP2 system?

I even tried totally deleting IE and Reg entries and it still will not
install stating that
"Setup was unable to install all the components, please close..."
What do you do, when it won't work? I think I am about to restart from
scratch, but I was hoping that there would be a fix from here first.

If you have tried to delete IE and deleted any reg entries, then you have
likely damaged the system. IE is a core part of the Windows XP program,
and
unlike IE6 versions of the past, it *can not* be uninstalled without
damaging or disabling the IE and Windows system. The only thing I can
suggest as this point is that you first a scan for any scumware with your
antivirus, and then do a full Repair install. Follow the instructions
here:

How to do a repair installation of XP - by Doug Knox
http://www.microsoft.com/windowsxp/using/helpandsupport/learnmore/tips/doug92.mspx

Hope this helps.

Jan
MS MVP - Windows IE/OE [DTS/AumHa]
Smiles are meant to be shared,
that's why they're so contagious.

Replies are posted only to the newsgroup for the benefit or other
readers.
How to make a good newsgroup post:
http://www.dts-l.org/goodpost.htm

:

Hi bdeditch

You don't mention the version of Windows you are using, which really
is a
must when asking for help in the newsgroups, nor what the problem is
that
you feel you need to reintsall IE. Perhaps if you tell us what the
problem
is we can help. A repair may not be the answer to the problem.

NOTE FOR SP2: If you have SP2 installed you will first have to
uninstall
it before doing the Repair:

Download the utility file at the link below, then double click on it
to
run
it and it will automatically reset the "IsInstalled" value to 0 (zero)
for
you. Then try the install again.
http://www.kellys-korner-xp.com/xp_tweaks.htm (line 114, right)

After the successful reinstall by any of the above methods, go
immediately
to the Windows Update website and let it scan your computer for any
necessary updates.

If you are not able to access the Internet, follow the instructions to
reset
the Registry below. Be sure to backup the Registry first.

Step-by-step instructions for a manual fix: If you have SP2,
uninstall
it
before doing the following:

First, go to Start>Run>type in regedit and hit enter
Click on File on the toolbar and click Export to back up your
Registry.
Make sure you make a not of where it is saved in case you need to
restore
it.

To reset the IsInstalled value to 0 (zero):

Go to [HKEY_LOCAL_MACHINE>SOFTWARE>Microsoft>Active Setup>Installed
Components>scroll down to {89820200-ECBD-11cf-8B85-00AA005B4383}]

Here are the "How to" steps to reset the value:

When you have clicked on the above {...} file, scroll down to
"IsInstalled"
in the right side panel and double click on it. A dialog box will
open
with
a window that has a 1 in it. To replace the 1, just type 0 (zero) to
replace the 1, click OK and close.
Then try the install again.

As soon as you have a successful install, go immediately to the
Windows
Update and let it scan and install all the necessary updates before
you
do
any browsing.


Hope this helps.

Jan
MS MVP - Windows IE/OE [DTS/AumHa]
Smiles are meant to be shared,
that's why they're so contagious.

Replies are posted only to the newsgroup for the benefit or other
readers.
How to make a good newsgroup post:
http://www.dts-l.org/goodpost.htm


I have tried many times and many ways to update my internet explorer
it
is
version 6.0.2600.0000IS
Product ID: 52783-010-7215742-14714
Update version: Q321232; Q324929
This is a customized version of internet explorer

I went to PCpitstop and it said the version also had telus.net
which
was a DSL provider in Canada

The update will go and then get to about 95% and then a little box
shows up saying the " Setup was unable to install all the
components,
please close....................... ( you know the rest)

What do I do to get a freesh installon IE 6 , I am running windows
ME

 

[Robert Aldwinckle]

....

Hi bdeditch

You don't mention the version of Windows you are using,

Where's that oops!! character when you need him? <W>


---

 

[Jan Il]

...


Where's that oops!! character when you need him? <W>

Under my nose like the windows ME.

Jan

 

[Jan Il]

My apologies to you , bdeditch. You did post your OS. It was below my
bottom bar and I didn't see it. <g>

Jan

 

[bdeditch]

Actually I fixed by going into the c/windows/windows update. I then
moved all of the files to another folder and did the update no problem
at all.

Hi bdeditch

You don't mention the version of Windows you are using, which really is a
must when asking for help in the newsgroups, nor what the problem is that
you feel you need to reintsall IE. Perhaps if you tell us what the problem
is we can help. A repair may not be the answer to the problem.

NOTE FOR SP2: If you have SP2 installed you will first have to uninstall
it before doing the Repair:

Download the utility file at the link below, then double click on it to run
it and it will automatically reset the "IsInstalled" value to 0 (zero) for
you. Then try the install again.
http://www.kellys-korner-xp.com/xp_tweaks.htm (line 114, right)

After the successful reinstall by any of the above methods, go immediately
to the Windows Update website and let it scan your computer for any
necessary updates.

If you are not able to access the Internet, follow the instructions to reset
the Registry below. Be sure to backup the Registry first.

Step-by-step instructions for a manual fix: If you have SP2, uninstall it
before doing the following:

First, go to Start>Run>type in regedit and hit enter
Click on File on the toolbar and click Export to back up your Registry.
Make sure you make a not of where it is saved in case you need to restore
it.

To reset the IsInstalled value to 0 (zero):

Go to [HKEY_LOCAL_MACHINE>SOFTWARE>Microsoft>Active Setup>Installed
Components>scroll down to {89820200-ECBD-11cf-8B85-00AA005B4383}]

Here are the "How to" steps to reset the value:

When you have clicked on the above {...} file, scroll down to "IsInstalled"
in the right side panel and double click on it. A dialog box will open with
a window that has a 1 in it. To replace the 1, just type 0 (zero) to
replace the 1, click OK and close.
Then try the install again.

As soon as you have a successful install, go immediately to the Windows
Update and let it scan and install all the necessary updates before you do
any browsing.


Hope this helps.

Jan
MS MVP - Windows IE/OE [DTS/AumHa]
Smiles are meant to be shared,
that's why they're so contagious.

Replies are posted only to the newsgroup for the benefit or other readers.
How to make a good newsgroup post:
http://www.dts-l.org/goodpost.htm

I have tried many times and many ways to update my internet explorer it
is
version 6.0.2600.0000IS
Product ID: 52783-010-7215742-14714
Update version: Q321232; Q324929
This is a customized version of internet explorer

I went to PCpitstop and it said the version also had telus.net which
was a DSL provider in Canada

The update will go and then get to about 95% and then a little box
shows up saying the " Setup was unable to install all the components,
please close....................... ( you know the rest)

What do I do to get a freesh installon IE 6 , I am running windows ME

 

[Jan Il]

Hi bdeditch

I'm glad to hear you were able to resolve your problem. Good job!

Thank you very much for posting back and letting us know what worked for
you, and for the benefit of other readers who might have a similar problem.

Jan
MS MVP - Windows IE/OE [DTS/AumHa]
Smiles are meant to be shared,
that's why they're so contagious.

Actually I fixed by going into the c/windows/windows update. I then
moved all of the files to another folder and did the update no problem
at all.

Hi bdeditch

You don't mention the version of Windows you are using, which really is a
must when asking for help in the newsgroups, nor what the problem is that
you feel you need to reintsall IE. Perhaps if you tell us what the
problem
is we can help. A repair may not be the answer to the problem.

NOTE FOR SP2: If you have SP2 installed you will first have to
uninstall
it before doing the Repair:

Download the utility file at the link below, then double click on it to
run
it and it will automatically reset the "IsInstalled" value to 0 (zero)
for
you. Then try the install again.
http://www.kellys-korner-xp.com/xp_tweaks.htm (line 114, right)

After the successful reinstall by any of the above methods, go
immediately
to the Windows Update website and let it scan your computer for any
necessary updates.

If you are not able to access the Internet, follow the instructions to
reset
the Registry below. Be sure to backup the Registry first.

Step-by-step instructions for a manual fix: If you have SP2, uninstall
it
before doing the following:

First, go to Start>Run>type in regedit and hit enter
Click on File on the toolbar and click Export to back up your Registry.
Make sure you make a not of where it is saved in case you need to restore
it.

To reset the IsInstalled value to 0 (zero):

Go to [HKEY_LOCAL_MACHINE>SOFTWARE>Microsoft>Active Setup>Installed
Components>scroll down to {89820200-ECBD-11cf-8B85-00AA005B4383}]

Here are the "How to" steps to reset the value:

When you have clicked on the above {...} file, scroll down to
"IsInstalled"
in the right side panel and double click on it. A dialog box will open
with
a window that has a 1 in it. To replace the 1, just type 0 (zero) to
replace the 1, click OK and close.
Then try the install again.

As soon as you have a successful install, go immediately to the Windows
Update and let it scan and install all the necessary updates before you
do
any browsing.


Hope this helps.

Jan
MS MVP - Windows IE/OE [DTS/AumHa]
Smiles are meant to be shared,
that's why they're so contagious.

Replies are posted only to the newsgroup for the benefit or other
readers.
How to make a good newsgroup post:
http://www.dts-l.org/goodpost.htm

I have tried many times and many ways to update my internet explorer it
is
version 6.0.2600.0000IS
Product ID: 52783-010-7215742-14714
Update version: Q321232; Q324929
This is a customized version of internet explorer

I went to PCpitstop and it said the version also had telus.net which
was a DSL provider in Canada

The update will go and then get to about 95% and then a little box
shows up saying the " Setup was unable to install all the components,
please close....................... ( you know the rest)

What do I do to get a freesh installon IE 6 , I am running windows ME