OCX problem

  • Thread starter Thread starter DJS
  • Start date Start date
D

DJS

I think I found the reason why MASW will not run a scan:
It appears I have an incorrect OCX. In the error log I get
the following message:

372::ln 30:Failed to load control 'RichTextBox' from
RICHTX32.OCX. Your version of RICHTX32.OCX may be
outdated. Make sure you are using the version of the
control that was provided with your
application.:AlertType=1::gcasServAlert:modMain:Main::1/11/
2005 11:21:18 AM:2000:1.0.501
438::ln 0:Object doesn't support this property or
method::gcasDtServ:modMain:ShutDown::1/11/2005 11:22:24
AM:1.0.501

I have checked the version of my OCX located in the
Winnt/system32 directory. It is version 6.1.97.82 with a
date of 2/23/04. Perhaps I have to new a version?
 
DJS said:
I think I found the reason why MASW will not run a scan:
It appears I have an incorrect OCX. In the error log I get
the following message:

372::ln 30:Failed to load control 'RichTextBox' from
RICHTX32.OCX. Your version of RICHTX32.OCX may be
outdated. Make sure you are using the version of the
control that was provided with your
application.:AlertType=1::gcasServAlert:modMain:Main::1/11/
2005 11:21:18 AM:2000:1.0.501
438::ln 0:Object doesn't support this property or
method::gcasDtServ:modMain:ShutDown::1/11/2005 11:22:24
AM:1.0.501

I have checked the version of my OCX located in the
Winnt/system32 directory. It is version 6.1.97.82 with a
date of 2/23/04. Perhaps I have to new a version?
Click to expand...

Good troubleshooting, but I don't think that's the answer yet--I have the
same OCX as you have, and I am not seeing these issues. Perhaps
re-registering the OCX might help:

regsvr32 \WINNT\system32\RICHTX32.OCX


Note that there is a SPACE after regsvr32 and before the backslash in the
above command.

You should see a message saying "DllRegisterServer ... succeeded"
 
re-registering the OCX solved my problem. Thanks!
-----Original Message-----
application.:AlertType=1::gcasServAlert:modMain:Main::1/11
/

Good troubleshooting, but I don't think that's the answer yet--I have the
same OCX as you have, and I am not seeing these issues. Perhaps
re-registering the OCX might help:

regsvr32 \WINNT\system32\RICHTX32.OCX


Note that there is a SPACE after regsvr32 and before the backslash in the
above command.

You should see a message saying "DllRegisterServer ... succeeded"



.
Click to expand...
 
Terrific!

One other user with a similar issue posted. in his case, the errors.log
referenced a different OCX, but the fix was similar. In his case, he found
that he needed to download a fresh copy of the OCX--it had become corrupted
in some way, he thought. But, downloading and re-registering took care of
the issue.

Thanks for confirming the fix--this will help others in a similar boat.
 
What version of windows are you using.

look at the requirements needed to install the program
below:

Minimum system requirements for Windows AntiSpyware (Beta):

.. Microsoft Internet Explorer 6.0 or higher

.. A 300 MHz or faster processor with at least 64 MB of RAM

.. Microsoft Windows 2000, Windows XP, or Windows ServerT
2003

.. At least 10 MB of available free space on your hard disk

.. Internet access with at least a 28.8 Kbps connection to
use SpyNetT

Always make sure you keep your computer updated with the
latest drivers.

http://v5.windowsupdate.microsoft.com/v5consumer/default.as
px?ln=en-us

COPY AND PASTE THE ABOVE LINK INTO YOUR BROWSER..

Good-Luck
 
Back
Top