Nvidia Riva TNT2 M64 help

  • Thread starter Thread starter Gabriel Knight
  • Start date Start date
G

Gabriel Knight

Hi all

I have searched the web lots for the agp card "Nvidia Riva TNT2 M64
(GA-622-32C)" but I cant find info about if this card runs at 1.5 Volts, my
mobo needs an agp card that is at 1.5 Volts. Also is this card 32 mb or 64mb
as reviews and different posts say one thing and others say another thing!

Thanks
GK :)
 
Gabriel said:
Hi all

I have searched the web lots for the agp card "Nvidia Riva TNT2 M64
(GA-622-32C)" but I cant find info about if this card runs at 1.5 Volts, my
mobo needs an agp card that is at 1.5 Volts. Also is this card 32 mb or 64mb
as reviews and different posts say one thing and others say another thing!

Thanks
GK :)
Click to expand...

The TNT2 M64 is listed as AGP 4X here. And AGP 4X should have
the slot cut in the edge card for 1.5V compatibility.

http://www.gpureview.com/search.php?query=tnt2

The edge connector on your card, may resemble the picture
on the right here. While a great many cards are keyed
correctly, there are a very small number that are not.
(For example, I think SIS305 might have been a bad one.
It should only have had the 3.3V slot cut, as it is an
AGP 2X card, yet cards were made with both slots cut. Such
a card can damage a 1.5V only motherboard.)

http://www.playtool.com/pages/agpcompat/voltageslots.jpg

If you can find evidence that your card supports AGP 4X,
and it has both slots cut, then it should be OK in a
1.5V motherboard.

Paul
 
Back
Top